Operation - Makita XJP03 Instruction Manual

Dust bag
1
2
014900
To attach the dust bag, fit it onto the dust nozzle. If the
dust bag becomes an obstacle to your work, turn the
dust nozzle to change the dust bag position.
When the dust bag is about half full, switch off and
remove the battery cartridge. Remove the dust bag from
the tool and pull the bag's fastener out. Empty the dust
bag by tapping it lightly to remove as much of the dust
as possible.
NOTE:
If you connect a Makita vacuum cleaner to your
•
plate joiner, more efficient and cleaner operations
can be performed.

OPERATION

How to make joints
WARNING:
Always clamp the workpiece to the workbench
•
before each operation.
004589
014901
1. Dust bag
2. Fastener
3. Dust nozzle
3
Corner Joint (Fig. A)
004584
014902
014910
T-Butt Joint (Fig. B)
004585
014910
8
Fig. A
Fig. B