Yamaha BANSHEE YFZ350W Owner's Manual page 112

3. Loosen the locknut and the adjusting bolt at
the rear brake caliper.
1
4. Turn the adjusting bolt at the clutch lever in di-
rection (a) to increase the cable length, and in
2
direction (b) to decrease it.
3
4
5
6
7
8
1. Locknut
9
2. Adjusting bolt
10
NOTE:
If the cable length cannot be adjusted to specifica-
11
tion, consult a Yamaha dealer.
5. Tighten the locknut at the clutch lever.
6. Turn in the adjusting bolt at the rear brake cal-
iper by hand until it feels tight, then turn it out
1 2
(a)
(b)
1. Locknut
2. Adjusting bolt
Tightening torque:
ECB00520
CAUTION:
When tightening the locknut, hold the adjust-
ing bolt with a wrench so that it does not turn
together with the locknut.
8-36
1/8 turn and tighten its locknut to the specified
torque.
1
2
Locknut (rear brake caliper):
16 Nm (1.6 m·kgf, 11 ft·lbf)