1. Tailpipe
2. Spark arrester
4. Insert the tailpipe into the muffler and align
the bolt holes.
8
5. Install the tailpipe bolts and tighten them to
the specified torque.
Tightening torque:
Tailpipe bolt:
10 Nm (1.0 m·kgf, 7.2 ft·lbf)
EWB02341
WARNING
Do not start the engine when cleaning the
spark arrester, otherwise it could cause injury
to the eyes, burns, carbon monoxide poison-
ing, possibly leading to death, and start a fire.
Always let the exhaust system cool prior to
touching exhaust components.
EBU23921
V-belt cooling duct check hose
If dust or water collects in the V-belt cooling duct
check hose, remove the hose and clean it.
1. V-belt cooling duct check hose (left front side of ATV)
8-34