Valve Clearance; Adjusting The Reverse Lock Release Cable; Brakes; Checking The Front And Rear Brake Pads - Yamaha YFM70RSBG Owner's Manual

(b)
1
(a)
2 3
1. Rubber cover
2. Throttle lever free play adjusting bolt
3. Locknut
4. Throttle lever free play
4. Tighten the locknut.
5. Slide the rubber cover to its original position.
EBU24061

Valve clearance

The valve clearance changes with use, resulting in
improper air-fuel mixture and/or engine noise. To
prevent this from occurring, the valve clearance
must be adjusted by a Yamaha dealer at the inter-
vals specified in the periodic maintenance and lu-
brication chart.
4
EBU24081
Adjusting the reverse lock release ca-
ble
The reverse lock release cable stretches with use,
which can result in improper function. Therefore,
the reverse lock release cable should be checked
and adjusted at the intervals specified in the peri-
odic maintenance and lubrication chart.
EBU29602

Brakes

Replacement of brake components requires pro-
fessional knowledge. Brake service should be
performed by a Yamaha dealer.
EWB02572
WARNING
Operating with improperly serviced or adjust-
ed brakes could lead to a loss in braking ability
and an accident.
EBU24131

Checking the front and rear brake pads

The front and rear brake pads must be checked
for wear at the intervals specified in the periodic
maintenance and lubrication chart.
8-29
8