Samsung QND-6010R User Manual page 44

setup screen
camera setup
You can change the camera settings according to the environment where the camera is located.
1. From the Setup menu, select the <audio & video (
tab.
2. Click <camera setup>.
3. Configure the settings as necessary of : Image preset, Sensor,
SSDR, White balance, Back light, Exposure, Day/Night,
Special, OSD, IR
4. When done, click [apply ( )].
If a certain time (timeout: 240s) is elapsed with your not pressing the [Apply
`
( )] button after changing the settings, your changes will not be
applied.
if you want to set an image preset
Users can set presets easily.
The selected image preset mode will be in operation during the configured period, but at other times the
values configured in the user preset mode are reflected.
1. Select a desired mode from the image presets.
• Definition focus : This is the factory setting for your camera.
Select it for video recording, focusing on reproducibility.
• Motion focus : Record a moving object clearly. If there are
many moving objects, such as on a road or in a crowded
place like a museum, select this option.
Noise level can increase in a low illumination environment, and
`
J
sensitivity can go down.
• Reduced noise : Select this when you need a video with
low noise in the low illumination environment.
• Bright video : This makes the dark area in a full video brighter.
Video contracts effects are reduced.
`
J
• Motion focus&Reduced noise : Use this when there are many moving objects, such as on a road
or in a crowded place like a museum, or when you need a video with low noise in a low illumination
environment.
• Motion focus&Bright video : Use it when there are many moving objects, such as on a road or in a
crowded place like a museum, or when you need to make a dark area in full video brighter.
• Vivid video : Makes the entire video displayed in vivid colors.
The contrast of the video reduces and the color reproducibility becomes low.
`
J
44_ setup screen
)>
• User preset : Select it if you want to display video with settings chosen by you.
When selecting a mode other than the preset mode, you can't set the shutter speed, AGC, SSDR, SSNR and color.
`
J
2. Set the camera item for each image preset mode.
3. Set the <activation time>.
• Off : Your camera will execute a specific image preset operation at all times.
• Only scheduled time : Your camera will execute a specific image preset operation for the time period set
by you on each date.
4. Click the [Setup ( )] button.
5. Set the <mode> and <time>.
6. When done, click [apply ( )].
initial setting for each image preset mode
Minimum Maximum
Image preset
shutter shutter
Definition focus Default (1/5) 1/12000
Motion focus 1/30 1/12000
Reduced noise 1/15 1/12000
Bright video Default (1/5) 1/12000
Motion focus&Reduced
1/30 1/12000
noise
Motion focus&Bright video 1/30 1/12000
Vivid video Default (1/5) 1/12000
User preset Manual Manual
The preset setup functions as an aid to users to configure setup. If you don't want the preset function, deactivate it before
`
M
use.
If you change the image preset, only shutter/AGC/SSDR/SSNR/COLOR are reset to the default value for each model.
`
The "Camera Setting" value does not change between presets.
`
AGC SSDR SSNR COLOR
Default (High) Default (12) Default (12) Default (50)
Default (High) Default (12) 4 Default (50)
Middle Default (12) Default (12) Default (50)
Default (High) 18 Default (12) Default (50)
Middle Default (12) 4 Default (50)
Default (High) 18 4 Default (50)
Default (High) 18 Default (12)
Manual Manual Manual Manual
90