Table of Contents
Advertisement
4 - INSTALLATION
TECHNICAL INFORMATION FOR THE INSTALLER
In order to install the cooker top into the kitchen fixture, a hole with the dimensions shown
in fig. 4.1 has to be made, bearing in mind the following:
within the fixture, between the bottom side of the cooker top and the upper surface
of any other appliance or internal shelf there must be a clearance of at least 30 mm.
It is absolutely essential that you place a separator between the base of the cooktop
and the built-in unit or the oven.
the cooker top must be kept no less than 200 mm away from any side wall (fig. 4.1).
the hob must be installed at least 60 mm from the wall.
there must be a distance of at least 650 mm between the hob and any wall cupboard
or extractor hood positioned immediately above (see fig. 4.2)
if the hob is installed over a built-in oven, there must be a distance of at least 30
mm between the two appliances. The two appliances should be connected to the gas
supply with independent connections.
Fig. 4.1
14
Advertisement
Table of Contents
