Honda 2012 Odyssey Owner's Manual page 363

uuReplacing Light BulbsuBrake/Rear Side Marker/Taillight and Rear Turn Signal Light Bulbs
Lower
Socket
Fastener
362
2. Place one hand on the outer corner of the
taillight assembly and other hand on the
lower edge of the taillight, near the cargo
area.
3. Pull the outer corner of the taillight
assembly toward you while supporting the
assembly with the hand closest to the cargo
area.
4. Turn the socket to the left and remove it.
Upper
5. Remove the old bulb and insert a new bulb.
Fastener
Bulb
1Brake/Rear Side Marker/Taillight and Rear Turn Signal Light
Bulbs
Grommet
To reinstall, insert the fasteners into the grommets
and push the assembly back into place.
uDo not reinstall the assembly if the grommets are
loose or out of the holes. Contact a dealer to
replace them.