Changing The Programme Sequence - Miele tmr640wp Operating Instructions Manual

You cannot change to another
programme once a programme has
started (this prevents unintentional
alterations).
If you move the programme selector,
Programme cannot be changed will
light up in the display until you move
the programme selector back to the
original programme.
You will need to cancel the current
programme before you can select a
new one.
Once a programme has
started ...
... cancelling the programme and
then selecting a new programme
 Press the Start/Stop button.
 Confirm Cancel programme with the
OK sensor.
– Cooling down will light up in the
display, depending on the drying
duration and the drying temperature
reached.
– Wait until Finish lights up in the
display or press the Start/Stop
button again until Finish lights up.
 Press the  button to switch the
dryer off.
 Press the  button to switch the
dryer on.
 Select and start a new programme
straight away.
... saving the programme as a
favourite
 Press the Start/Stop button.

Changing the programme sequence

 Select and confirm Save programme.
You can save this programme under
Favourites. See "Favourites, 2. Entering
a name".
Adding or removing laundry
after a programme has started
 Press the Start/Stop button.
 Select Cancel programme.
 Confirm by touching the OK sensor.
– Cooling down will light up in the
display, depending on the drying
duration and the drying temperature
reached.
– Wait until Finish lights up in the
display or press the Start/Stop
button again until Finish lights up.

Do not touch the back of the drum
when adding or removing items. The
drum and the items can be very hot.
 Add or remove items.
 Close the door.
To continue with the programme:
(change the drying level first of all, if
necessary)
 Press the Start/Stop button.
Programme duration
Altering the programme sequence can
cause the programme duration shown
in the display to be adjusted.
Danger of burning.
45