Multi-View Rear Camera; Homelink - Honda 2012 PILOT EX-L Technology Reference Manual

MULTI-VIEW REAR CAMERA

For added convenience, the area behind your vehicle is displayed to help you navigate
while backing up.
How It Works
• When you shift into Reverse (R), a real-time image
of the area behind your vehicle is shown in the
navigation display.
• Yellow parking guide lines also appear to help you
judge distance.
• The rearview display turns off when you shift out of
Reverse.
Adjusting the View
Turning the Guide Lines
On or Off
Press and hold CANCEL for
about 3 seconds.
8
Switching Views
There are 3 rearview modes: wide,
normal, and top down.
• Press ENTER to toggle between views.
• Rotate the Interface Dial to adjust the
screen brightness.
Wide
Wide
Normal Top down
Normal Top down

HOMELINK

The HomeLink Universal Transceiver can be programmed to operate up to three
remote-controlled devices around your home, such as garage doors, lighting, or home
security systems.
Training a Button
1
Position the remote transmitter you
wish to link 1–3 inches from the
HomeLink button you want to program.
2
Press and hold the desired
HomeLink button and the button on
the remote transmitter.
Does the HomeLink indicator (LED) blink at a
faster rate after about 10 seconds?
NO YES
a
Press and hold the button on the
remote and the HomeLink button at
the same time. Then, while
continuing to hold the HomeLink
button, press and release the button
on the remote every 2 seconds.
Does the LED blink at a faster rate within 20
seconds?
NO YES
If you have any problems programming HomeLink, see the owner's manual included
with the device you are trying to program, call HomeLink at (800) 355-3515, or
visit www.homelink.com.
®
Press and hold the programmed
3
HomeLink button for about a
second.
Does the device (garage door opener) work?
NO YES
4
Training
Press and hold
complete
the HomeLink
button again.
HomeLink indicator HomeLink LED
flashes for 2 seconds,
remains on.
then remains on.
a
The remote has a rolling code.
Press the "learn" button on the
remote-controlled device (e.g.,
garage door opener).
b
Within 30 seconds, press and
hold the programmed HomeLink
button for 2 seconds.
5
Press the programmed HomeLink
button again; the remote-controlled
device should operate.
9