Direct Tcp/Ip Connection From Visual Studio - Casio IT-9000WM Series Quick Start Manual

5.7 Direct TCP/IP Connection from Visual Studio

If you have a network connection to IT-9000 (for example, via WLAN or the Ethernet cradle) then
you can establish a direct link to the development PC without using ActiveSync.
For Visual Studio 2005
1. Download the files listed below to IT-9000.
-
-
-
-
-
-
The source folder in the PC:
C:\Program Files\Common Files\Microsoft Shared\CoreCon\1.0\Target\wce400\armv4i
The destination folder in IT-9000:
\Windows
2. Run ConmanClient2.exe on IT-9000.
3. Set the device IP address in Visual Studio 2005.
4. Navigate to Tools in the main menu of Visual Studio 2005 → Options... → Device Tools
→ Devices.
5. Choose Windows Mobile 6 Professional Device in the pull-down menu of Devices: and
click Properties....
6. Click Transport: to access Configure... and set up Device IP address as shown in Figure
5.5.
Figure 5.57
7. Run CMAccept.exe on IT-9000.
8. Navigate to Tools in the main menu of Visual Studio 2005 → Connect to Device....
Clientshutdown.exe
ConmanClient2.exe
CMAccept.exe
DeviceDMA.dll
eDbgTL.dll
TcpConnectionA.dll
42