Breville VIN239 Instruction Booklet page 6

filling your iron
Never add fabric conditioner, starches or any other chemicals to the water in
your iron.
1. Ensure your iron is switched off and unplugged from the mains supply socket.
2. Set the steam control to the off (0) position.
3. Open the water tank inlet cover.
4. Using a jug, fill the water tank with ordinary tap water. To avoid air locks, tilt your iron
slightly while filling it.
5. Don't fill the iron above the water level indicator MAX marking. Check the water level
by standing the iron on its heel.
6. When the iron is filled close the water tank inlet cover.
6