Panasonic TH-P42X30A Operating Instructions Manual page 26

Main Menu
Picture
Sound
Setup
Item
Input Resolution
Clock
H-pos
V-pos
Clock Phase
Sync
• H & V
• SOG
Reset PC Settings
H-pos
V-pos
Reset DVI Position
Settings
Off Timer
• Off
• 15 / 30 / 45 / 60 / 75 /
90 minutes
Eco Navigation
Child Lock
Favourites Edit
Channel List
Auto Tuning
Manual Tuning
Update Channel List Updates the channel list while keeping your settings (Digital TV mode) (p. 30)
New Channel Message
• Off
• On
Signal Condition
Add TV Signal
26
Adjustments / Configurations (alternatives)
Switches to a wide view
•
VGA (640 × 480 pixels), WVGA (852 × 480 pixels),
XGA (1,024 × 768 pixels), WXGA (1,280 × 768 pixels, 1,366 × 768 pixels)
•
Options change depending on signals
Sets to the minimum level if noise occurs.
Eliminates flicker and distortion
•
Adjust after Clock adjustment
•
Set to the minimum level if noise occurs
PC sync signal type
[H & V]: by the horizontal and vertical signals from your PC
[SOG]: Sync on Green sync from your PC
Press the OK button to reset the PC Setup settings to the default.
Adjusts horizontal position settings of DVI
Adjusts vertical position settings of DVI
Press the OK button to reset the DVI Position Settings to the default.
Sets the time until the TV automatically goes to Standby mode
Automatically sets the TV to the most suitable energy-saving mode
•
If you press the OK button, the following items are set as below:
[Eco Mode], [VIERA Link], [Power off Link], [Standby Power Save],
[Power Save] [On]
[Intelligent Auto Standby]
[Auto Standby] [2 hours]
Locks a channel / AV input to prevent access to it (p. 32)
Creates list of favourite channels (Digital TV mode) (p. 29)
Skips the unwanted channels or edits channels (p. 29, 31)
Sets all Digital TV or Analogue TV channels automatically (p. 30, 31)
Sets the TV channels manually (p. 30, 31)
Selects whether to give a notification message when a new channel is
found (Digital TV mode) (p. 30)
Checks the Digital TV signal condition (p. 30)
Adds the TV mode
•
This function is available if you skip any modes to tune in [Auto Tuning]
for first using the TV.
•
To operate, refer to the [Auto Tuning] operations for first using the TV (p. 12).
Adjusts horizontal position
Adjusts vertical position
[On (No reminder)]