Brother MFC-J5620DW Quick Setup Manual

MFC-J5620DW / MFC-J5625DW
MFC-J5720DW
Quick Setup Guide
Read the Product Safety Guide first, then read this Quick Setup Guide
for the correct installation procedure.
Unpack the machine and check the components
1.
2.
Watch our FAQ Videos for help
with setting up your Brother
machine.
solutions.brother.com/videos
Introductory Ink Cartridges
[x4]
Black
Visit the Brother support website
Yellow
http://support.brother.com
Cyan
Magenta
(Approx. 65% yield of the
replacement cartridge (High
Yield) uu Basic User's Guide:
Supplies)
1
Load plain A4 paper
Pull the paper tray completely
out of the machine.
2 Connect power cord and telephone line cord
If you are not using your machine as a fax, connect the power cord and go to
(Example for UK)
Connect the power cord.
Lift the scanner cover.
3
Install introductory ink cartridges
1
Open the ink cartridge cover a.
Remove the protective tape and film covering the machine, and also from the
Touchscreen.
Make sure you have all components.
The components included in the box may differ depending on your country.
Quick Setup Guide
Basic User's Guide
Product Safety Guide
Maintenance Sheet
Do not exceed this
mark (aaa).
Adjust the paper guides.
Fan the paper well and load it in the tray.
3 .
(Example for UK)
Connect the telephone line cord.
Use the socket marked LINE and guide
the cord out the back of the machine.
Follow the Touchscreen instructions
to install the ink cartridges.
The machine will prepare the ink
tube system for printing.
WARNING indicates a potentially hazardous situation which, if not
WARNING
avoided, could result in death or serious injuries.
NOTE specifies the operating environment, conditions for installation, or
NOTE
special conditions of use.
WARNING
Plastic bags are used in the packing of your machine. To avoid the danger of
suffocation, keep these plastic bags away from babies and children. Plastic bags
are not toys.
NOTE
Most of the illustrations in this Quick Setup Guide show the MFC-J5720DW.
• Save all packing materials and the box in case for any reason you must ship your
machine.
• You must purchase the correct interface cable for the interface you want to use
(for USB or network connection).
CD-ROM
USB cable
We recommend using a USB 2.0 cable (Type A/B) that is no more than 2 metres
long.
Network cable
Use a straight-through Category5 (or greater) twisted-pair cable for 10BASE-T or
100BASE-TX Fast Ethernet Network.
Power Cord
(for UK) (for others)
Telephone Line Cord
1
Pull out the paper support a, and
unfold the paper support flap b.
NOTE
If you are sharing one telephone line with an external
telephone, connect it as shown below.
1
2
a. Extension telephone
b. External telephone
NOTE
You can adjust the angle of the control
panel by lifting it.
2
Close the scanner cover.
4
Machine Settings
When the machine has finished the initial cleaning process,
follow the Touchscreen instructions to configure the machine
settings.
• Check print quality
• Set date and time
• Set tray settings
• View operation tips
• Print the installation sheet
UK
Version 0