Radio - JVC KD-R646 Instruction Manual

RADIO

Search for a station
1
Press L SOURCE to select FM, AM, SW1 or SW2.
Press E / F (or 2 / 3 on RM-RK52) to search for a station automatically.
2
(or)
Press and hold E / F (or 2 / 3 on RM-RK52) until "M" flashes, then press
repeatedly to search for a station manually.
Store a station
You can store up to 18 stations for FM and 6 stations for AM/SW1/SW2.
While listening to a station....
Press and hold one of the number buttons (1 to 6) to store.
(or)
1
Press and hold the volume knob until "PRESET MODE" flashes.
2
Turn the volume knob to select a preset number, then press the knob.
The preset number flashes and "MEMORY" appears.
Select a stored station
Press one of the number buttons (1 to 6).
(or)
1
Press MENU.
2
Turn the volume knob to select a preset number, then press the knob.
Other settings
"ST" lights up when
1
Press and hold MENU.
receiving an FM stereo
2
Turn the volume knob to select [TUNER], then press the knob.
broadcast with sufficient
signal strength. 3
Turn the volume knob to make a selection (see the table below), then press
the knob.
4
Press MENU to exit.
SSM
MONO
IF BAND
RADIO TIMER
5
SSM 01 – 06 / SSM 07 – 12 / SSM 13 – 18: Automatically presets up to 18
stations for FM. "SSM" stops flashing when the first 6 stations are stored. Select
SSM 07 – 12 / SSM 13 – 18 to store the following 12 stations.
Displayed only when the source is FM.
MONO ON: Improves the FM reception, but the stereo effect will be lost. ;
MONO OFF: Cancels.
AUTO: Increases the tuner selectivity to reduce interference noises from adjacent
stations. (Stereo effect may be lost.) ; WIDE: Subjects to interference noises from
adjacent stations, but sound quality will not be degraded and the stereo effect will
remain.
Turns on the radio at a specific time regardless of the current source.
1 ONCE/ DAILY/ WEEKLY/ OFF: Select how often the timer will be turned on.
2 FM/ AM/ SW1/ SW2: Select the FM, AM, SW1 or SW2 band.
3 01 to 18 (for FM)/ 01 to 06 (for AM/SW1/SW2): Select the preset station.
4 Set the activation day and time.
• "M" lights up when complete.
Radio Timer will not activate for the following cases.
• The unit is turned off.
• [OFF] is selected for [AM] in [SRC SELECT] after Radio Timer for AM is selected.
(➜ 4)
Default: XX
ENGLISH