How To Use; Water Hardness & Regeneration; Settings - Beko QDW696 User Manual

m m
1 5
5

How to use

Water hardness & regeneration settings
The dishwasher requires lime free water. Hard water leaves watermarks on
your dishes. Your dishwasher has a special water softening system to remove
the hardness of the tap water. Setting this system correctly will increase the
washing effectiveness.
To find out the hardness level of water in your area, contact your local Water
Board or determine water hardness level by the help of test strip provided.
If you move to a different location, the level of water hardness will
possibly be different. It is essential to reset the water hardness in
order to obtain optimum washing efficiency.
Test Strip
a
b
Remove the Let the water
test strip from flow from your
its packing. tap for 1 minute.
c
d
1 second
Take the test strip
Fill a glass with
tap water and out of the water and
dip the test strip shake it.
into water for 1
second.
e
f
Level 1
Level 2
Level 3
Level 4
1 minute
Level 5
Level 6
Hold for Set the water hardness level of your dishwasher
1 minute. according to the result shown by the test strip.
11 GB
Make sure your
dishwasher is perfectly
level using the
adjustable feet.
When the appliance is
correctly levelled, the
door will not catch on
the inner liner on either
side of the cabinet.
If the door does
not close correctly,
loosen or tighten the
adjustable feet, until
the machine is perfectly
level.
No Lime
Very low lime content
Low lime content
Medium lime content
High lime content
Very High lime content