Introduction - Sharp XG-V10XE Operation Manual

Before using the LCD projector, please read this operation manual carefully.

Introduction

IMPORTANT
For your assistance in reporting the loss or theft of your
Colour LCD Projector, please record the Serial Number
located on the bottom of the projector and retain this
information. Before recycling the packaging, please be
sure that you have checked the contents of the carton
thoroughly against the list of "Supplied Accessories"
on page 13.
WARNING:
Intense light source. Do not look into the beam or view it directly. Be especially
careful that children do not look directly into the beam.
WARNING:
To reduce the risk of fire or electric shock, do not expose this appliance to liquids.
CAUTION:
To reduce the risk of electric shock, do not remove cabinet. No user-serviceable
parts are inside. Refer servicing to qualified service personnel.
WARNING:
This is a class A product. In a domestic environment this product may cause radio
interference in which case the user may be required to take adequate measures.
WARNING:
The cooling fan in this projector continues to run for about 90 seconds after the
projector is turned off. During normal operation, when turning the power off always
use the POWER OFF button on the projector or the remote control. Ensure the
cooling fan has stopped before disconnecting the power cord.
DURING NORMAL OPERATION, NEVER TURN THE PROJECTOR OFF BY
DISCONNECTING THE POWER CORD. FAILURE TO OBSERVE THIS WILL RESULT
IN PREMATURE LAMP FAILURE.
1
Model No.: XG - V10XE
Serial No.:
ENGLISH