Basic Operations; Direct Access Tuning; Direct Music Search - Kenwood KDC-U3553 Instruction Manual

RC-405
(Not used.)

Basic operations

SRC : Selects the available sources.
VOL : Adjusts the volume level.
5 / ∞
: Selects folder/track/file (in Music
Search mode).
ENT : Pauses/resumes playback.
Confirms selection (in Music
Search mode).
*AM– / #FM+ : Selects bands.
Selects folders.
4 / ¢ (+) : Searches for radio station.
Selects track/file.
Fast-forward/reverses track
if pressed and held.
1 – 6 : Selects preset station.
AUD : Enters [AUDIO CTRL] settings
directly.
ATT : Attenuates the sound. (To return
to the previous level, press the
button again.)
: Returns to the previous item (in
Music Search mode).
EXIT : Exit from setting mode.
Caution:
Do not set the remote control in hot places
such as on the dashboard.
Lithium battery.
Danger of explosion if the battery is
incorrectly replaced. Replace only with the
same or equivalent type.
The battery pack or batteries shall not be
exposed to excessive heat such sunshine,
fire or the like.
Keep battery out of reach of children and in
original package until ready to use. Dispose
of used batteries promptly. If swallowed
contact physician immediately.

Direct Access Tuning

1 Press FM+ / AM– to select a band.
2 Press DIRECT to enter Direct Access
Tuning mode.
"– – – –" appears on the display.
3 Press the number buttons to enter the
frequency.
4 Press 4 / ¢ ( + ) to search for the
frequency.
To cancel Direct Access Tuning mode, press
or EXIT.
If no operations is done for 10 seconds
after step 3, Direct Access Tuning is
automatically canceled.

Direct Music Search

• Not available if Random Play is selected.
• Not applicable for Kenwood Music Editor.
1 Press DIRECT to enter Direct Music
Search Mode.
"– – –" appears.
2 Press the number buttons to enter the
track number.
3 Press 4 / ¢ to search for the music.
To cancel the Direct Music Search Mode,
press or EXIT.
11