Fujitsu fi-453PR Operator's Manual page 4

Bescheinigung des Herstellers /
Importeurs
Hiermit wird bescheinigt, daß der/die/das
fi-453PR
•
In Übereinsstimmung mit den Bestimmungen der
EN45014(CE) funkentstört ist.
•
Laut Maschinenlärminformationsverordnung 3.
GS GV, 18.01.1991:Der höchste
Schalldruckpegel beträgt 70 dB (A) order weniger
gemäß ISO/7779.
International ENERGY STAR® Program
E S
As an NERGY
PFU LIMITED has determined
that this product meets the
®
E S
NERGY TAR
energy efficiency.
E
The International
Equipment Program is an international program that
promotes energy saving through the penetration of
energy efficient computers and other office
equipment. The program backs the development and
dissemination of products with functions that
effectively reduce energy consumption. It is an open
system in which business proprietors can participate
voluntarily. The targeted products are office
equipment such as computers, monitors, printers,
facsimiles, copiers, scanners, and multifunction
devices. Their standards and logos (
uniform among participating nations.
Use in High-safety Applications
This product has been designed and manufactured
on the assumption that it will be used in office,
personal, domestic, regular industrial, and
general-purpose applications. It has not been
designed and manufactured for use in applications
(simply called "high-safety applications" from here
on) that directly involve danger to life and health
when a high degree of safety is required, for
example, in the control of nuclear reactions at
nuclear power facilities, automatic flight control of
aircraft, air traffic control, operation control in
mass-transport systems, medical equipment for
sustaining life, and missile firing control in weapons
systems, and when provisionally the safety in
question is not ensured. The user should use this
product with adopting measures for ensuring safety
in such high-safety applications. PFU LIMITED
assumes no liability whatsoever for damages arising
from use of this product by the user in high-safety
applications, and for any claims or compensation for
damages by the user or a third party.
2 |
®
TAR Partner,
guidelines for
S ®
NERGY TAR Office
) are
Conventions
Warning Indications Used In This Manual
This indication alerts operators to an operation
WARNING that, if not strictly observed, may result in
severe injury or death.
This indication alerts operators to an
operation that, if not strictly observed, may
CAUTION
result in safety hazards to personnel or
damage to equipment.
Symbols Used In This Manual
This manual uses the following symbols in
explanations in addition to warning indications
This symbol alerts operators to particularly
ATTENTION
important information. Be sure to read this
information.
This symbol alerts operators to helpful advice
HINT
regarding operation.
A TRIANGLE symbol indicates that special care
and attention is required.
The drawing inside the triangle shows the specific
caution.
A CIRCLE with a diagonal line inside shows action
which users may not perform.
The drawing inside or under the circle shows the
specific action that is not allowed.
Outline characters on a colored background show
R
instructions users should follow.
It may also include the drawing that shows the
specific instruction.
Screen Examples In This Manual
The screen examples in this manual are subject to
change without notice in the interest of product
improvement.
If the actual displayed screen differs from the screen
examples in this manual, operate by following the
actual displayed screen while referring to the User's
Manual of the scanner application you are using.
Furthermore, the screenshots in this manual are for
®
Windows , FUJITSU TWAIN 32 Scanner Driver.
About Maintenance
The user must not perform repairs on this scanner.
Contact the store where you purchased the scanner
or an authorized FUJITSU Image Scanner service
provider to make repairs to this product.