Epson 3020+ Quick Setup

PowerLite Home Cinema 3020+
®
Quick Setup
Before using the projector, make sure you read the safety instructions in the
User's Guide on your projector CD.
Choose a location
Keep the projector level and place it at a height so its lens is even with the top
or the bottom of the screen and is centered horizontally. If this isn't possible,
use the horizontal keystone slider and keystone correction buttons on your
projector to reposition the image (see "Adjust the image").
In order to view 3D images correctly, 3D RF glasses must be worn within 32 feet
(10 m) of the projector. Use the image below to determine the viewing distance
for 3D projection (the shading represents the 3D viewing area):
See the User's Guide on your projector CD for more information on where to
place your projector.
Connect the projector
Connect up to 5 video devices and use the Source buttons on the remote or
the button on the projector to switch between them.
For additional connection types, see the User's Guide on your projector CD.
HDMI cable
RCA video cable
Audio cable
Component video cable
Audio cable
Turn on your equipment
1
Turn on your video source.
2
Plug in the projector. The
3
Remove the lens cap.
4
Press the power button on the projector or the On button on the
remote control. The power light flashes blue, and then stays on.
Note: To shut down the projector, press the
projector twice or the Standby button on the remote control, then
unplug it. You don't have to wait for the projector to cool down.
5
The default language of the menu system is English. To select another
language, press the Menu button on the remote control. Select Extended
and press Enter. Select Language and press Enter. Select your language
and press Enter. Press the Menu button to exit the menu system.
Adjust the image
1
If you don't see an image, press the Source buttons on the remote
control or the button on the projector to select the image source.
Note: If you still see a blank screen or have other display problems, see
"Troubleshooting".
2
To raise the image, adjust the front feet as shown below.
3
Turn the zoom ring to reduce or enlarge the image.
power button on the projector turns blue.
power button on the