Advertisement
Output Capacity (kVA)
Output Watt Capacity (Watts)
Nominal Voltage Details
Frequency Compatibility
Frequency Compatibility Details
Output Voltage Regulation (Battery
Mode)
Included Output Power Cables
UPS Output Receptacles (Surge
Suppression Only)
Hot-Swap PDU options
Output AC Waveform (AC Mode)
Output AC Waveform (Battery
Mode)
Nominal Output Voltage(s)
Supported
Output Receptacles
Individually Controllable Load Banks
BATTERY
Battery Type
Full Load Runtime (min.)
Half Load Runtime (min.)
Expandable Runtime
DC System Voltage (VDC)
Battery Recharge Rate (Included
Batteries)
VOLTAGE REGULATION
Voltage Regulation Description
Undervoltage Correction
USER INTERFACE, ALERTS & CONTROLS
Front Panel LCD Display
Switches
Alarm Cancel Operation
Audible Alarm
LED Indicators
1.0
500
230V nominal output in battery mode
50 / 60 Hz
Automatic frequency selection
+/- 5%
Includes 2 C13 to C14 output power cables
3 UPS outlets, 3 surge-only outlets
PDUBHV10 (2U / 8 C13 outlets)
Sine wave
PWM sine wave
220V; 230V; 240V
(6) C13
No
Valve Regulated Lead Acid (VRLA)
3 min. (500w)
11 min. (250w)
No
12
Less than 20 hours from 10% to 90%
Automatic voltage regulation (AVR) maintains line power operation with input voltage as low as 171
Input voltages between 199 and 171 are boosted by 14%
Backlighted LCD screen indicates input voltage, 5-bar battery charge level, overload, AVR, on battery and replace
battery status; LCD screen rotates for rack/tower viewing
2 Switches control off/on power status and alarm-cancel/self-test operation
Power-fail alarm can be silenced using alarm-cancel switch; once silenced, alarm will re-sound to indicate low-
battery status
Audible alarm indicates power-failure and overload status; alarm can be disabled using PowerAlert software
Front panel LCD display
3 / 5
Advertisement
