Table of Contents
Advertisement
Setup menus
(continued)
USER menu
<EDIT>
No./Item
324
This sets the maximum JOG REV speed.
JOG REV MAX
0000
0001
–1.85 : –1.85a speed
0002
0003
–0.43 : –0.43 (–0.5)a speed
<Notes>
OThe value for the DV/DVCAM tape is shown in
parenthesis (
OThe maximum speed is set to –1a when the
dial on the front panel is operated.
325
This sets the postroll time.
Any time from 0 to 5 seconds can be set in 1-
POSTROLL TM
second units.
0000
0001
0002
0003
0004
0005
USER menu
<TAPE PROTECT>
No./Item
400
This selects the time to be taken until the
unit goes into the tape protection mode when
STILL TIMER
it is left standing in the stop or search still
(JOG/SLOW/SHTL) mode.
(Unit: s = second, min = minute)
0000
0001
0002
0003
0004
0005
0006
0007
1min
0008
2min
The underlined items indicates the initial setting.
48 (E)
Description
–4.1 : –4.1 (–3.1)a speed
–1 : –1a speed
).
0s
1s
2s
3s
4s
5s
Description
<Notes>
0.5s
OSTEP FWD and HALF
5s
LOADING are provided in
10s
the tape protection mode.
20s
Either of these can be set
30s
for STOP and SEARCH
40s
STILL.
50s
OThe cumulative standby
time at the same tape
position increases when
transmitting programs or
otherwise using identical
materials repeatedly.
In order to protect the tape,
it is recommended that the
shortest possible setting for
the standby time in the
same tape location is used.
OWhen a DV/DVCAM tape is
used, any setting above 10
seconds will be treated as
10 seconds.
No./Item
401
When the time selected as the setup menu
item No. 400 (STILL TIMER) setting elapses
SRC PROTECT
while the unit is in the search STILL
(JOG/SLOW/SHTL)
automatically
protection modes. This menu item is for
selecting which tape protection mode the
unit is to enter.
0000
STEP : STEP FWD
0001
HALF : HALF LOADING
<Note>
When STEP FWD is selected, the unit
automatically goes into the STANDBY OFF
(HALF LOADING) mode when the total time for
which the unit is left standing in the still status
reaches 30 minutes (or 1 minute for a
DV/DVCAM tape).
402
This selects the drum operation in the
STANDBY OFF (HALF LOADING) mode.
DRUM STDBY
0000
OFF : The drum stops rotating.
0001
403
When the time selected as the setup menu
item No. 400 (STILL TIMER) setting elapses
STOP
while the unit is in the STOP mode, the unit
PROTECT
automatically
protection modes. This menu item is for
selecting which tape protection mode the
unit is to enter.
0000
STEP : STEP FWD
0001
HALF : HALF LOADING
<Note>
When STEP FWD is selected, the unit is
automatically transferred to the STANDBY OFF
(HALF LOADING) mode when the total time
during which it has been left standing in the
STOP mode reaches 30 minutes (or 1 minute for
a DV/DVCAM tape).
Description
mode,
the
enters
one
of
the
ON : The drum continues rotating.
enters
one
of
the
unit
tape
tape
Advertisement
Table of Contents
