3. Connection Configuration
LAN Connection
■
Connection Configurations
MNT ports are used for connecting a LAN for operation management.
Figure 80
Connection Example without a Dedicated Remote Support Port
Administration
terminal
IP address A
Note
The following figure provides connection examples for when setting the IP address of the Slave CM.
Figure 81
Connection Example When the IP Address of the Slave CM Is Set (and a Dedicated Remote
Support Port Is Not Used)
Administration
terminal
SNMP
E-mail server
manager
LAN switch
CM#0
Controller enclosure
ETERNUS AF
SNMP
E-mail server
manager
Syslog server
LAN switch
LAN for operation management
IP address A
IP address B
CM#0
Controller enclosure
ETERNUS AF
NTP server
Authentication
Syslog server
server
LAN for operation management
RMT ports are not used.
CM#1
NTP server
Authentication
server
Remote support
center
RMT ports are not used.
The IP addresses of the Master CM
and the Slave CM are set.
CM#1
138
Remote support
center
Design Guide