AEG KRC 4330 DVB-T Instruction Manual page 27

Changing system settings
CAUTION:
Select only the option "on" with "Antenna Setting",
if you connect an active DVB-T antenna. Otherwise,
the receiver or antenna may be damaged.
Setting
Antenna Setting
Country Setting
OSD Language
Audio Language
Subtitle Language
LCN
GMT Usage
Time Zone
Set date
Set time
 Carry out the desired settings.
Setting
TV Format
TV Mode
OSD Transparenz
Banner Display Time 1s-Always
Video Enhancement
 Carry out the desired settings.
AEG_KRC_4330.indd 27
Options Explanation
off/on When "off", no voltage is connected to the antenna output – suitable
for connection to the roof antenna and the passive DVB-T antenna.
When "on" an active DVB-T antenna without its own power supply can
be connected.
Select your country.
You can select the required language for the screen menu.
Here you can set the preferred audio language.
Here you can select the preferred subtitle language.
on/off If supported by TV channels, with the LCN function switched on, your
regional channels are saved sorted, independent from their frequency.
It is not possible to sort the channels if the LCN function is activated.
On/off Here you can set whether the time zone should be set automatically.
Here you can set the corresponding time zone.
Here set the date manually.
(Only possible if the option "GMT Usage" is set to "Off".)
Here set the time manually.
(Only possible if the option "GMT Usage" is set to "Off".)
Options Explanation
4:3 LB/4:3 PS/ Select between 4:3 format or 16:9 format (wide screen) according to your
16:9/16:9 AUTO screen.
4:3 LB: transmissions in wide screen format are fully displayed. You will see
black margins on the top and the bottom of the screen.
4:3 PS: Transmissions in wide screen format are altered in such a way
that the most important part of the picture is always in the centre of a
4:3 picture.
16:9: Select the 16:9 format with a wide screen TV.
16:9 AUTO: Select the 16:9 format for a television with a wide screen is so
that the picture is completely filled.
PAL/NTSC/AUTO If you are not sure which TV standard is suitable, select "Auto".
1-8 Select the transparency of the OSD menu.
Select the time after which the OSD is to fade out.
Off/on With the Video Enhancement switched on the menu for setting the Flesh Tone
and black/white Expansion opens. Please make the required adjustments.
Select the "SETUP/Installation menu".
You can carry out the following settings in the
submenus:
Select the "SETUP/TV-SETUP" menu.
You can carry out the following settings in the
submenus:
English
27
10.09.2009 13:24:59 Uhr