Veeam Backup & Replication; Notes On Operation; Notes On Using Windows Server 2019 - Fujitsu ETERNUS LT260 User Manual

Tape library

Hide thumbs Also See for ETERNUS LT260:

Table of Contents

Chapter 4 Setting Backup Software

4.7 Veeam Backup & Replication

4.7

Veeam Backup & Replication

This section provides notes about the settings that are performed for Veeam Backup & Replication.

4.7.1

■

Cleaning tape drives

Veeam Backup & Replication does not have a function to manually clean tape drives. Use the tape library to

manually clean the tape drives.

■

Label of a data cartridge

Veeam recognizes any media with a barcode label whose first three letters are "CLN" or "CLR" as cleaning

media. Therefore, if the first three letters of the barcode label of a data cartridge are set to "CLN" or "CLR", that

data cartridge becomes unavailable.

■

Automatically cleaning the tape library

If the tape library's automatic cleaning function conflicts with a Veeam backup or restore operation, a drive

error occurs in Veeam. Therefore, do not use the tape library's automatic cleaning function.

4.7.2

To use Veeam Backup & Replication on Windows Server 2019, ETERNUS LT series Tape Library Driver is

required.

Install the Windows Server 2016 device driver (w2k16) in Windows Server 2019.

For the download and the installation procedure of the Tape Library Driver, refer to the following website.

https://www.fujitsu.com/global/support/products/computing/storage/download/

FUJITSU Storage ETERNUS LT260 Tape Library User's Guide -Server Connection-

P3AM-8812-07ENZ0

Table of Contents