Connectors And Led Indicators - Cisco Catalyst 3560X-24P Datasheet

Cisco catalyst 3560x-24p: specifications
Hide thumbs Also See for Catalyst 3560X-24P:
Table of Contents

Advertisement

Environmental Ranges
With AC Power Supply
Operating Environment and Altitude
With DC Power Supply
Operating Environment and Altitude
Acoustic Noise
(with 16 PoE+ ports loaded)
Relative Humidity
Storage Environment:
Vibration
Shock
Connectors and LED Indicators for Cisco Catalyst 3750-X and 3560X Series
Table 9 shows connectors and LED indicators.
Table 9.
Connectors
and Cabling
Power
Connectors
© 2010 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.

Connectors and LED Indicators

● 1000BASE-T ports: RJ-45 connectors, 2-pair Cat-5E UTP cabling
● 1000BASE-T SFP-based ports: RJ-45 connectors, 2-pair Cat-5E UTP cabling
● 100BASE-FX, 1000BASE-SX, -LX/LH, -ZX, -BX10, DWDM and CWDM SFP Transceivers: LC fiber connectors (single-mode or
multimode fiber)
● 10GBASE-SR, LR, LRM, CX1 (v02 or higher) SFP+ Transceivers: LC fiber connectors (single-mode or multimode fiber)
● Cisco StackWise stacking ports: copper-based Cisco StackWise cabling
● Cisco StackPower: Cisco Proprietary Power Stacking cables
● Ethernet Management port: RJ-45 connectors, 2-pair Cat-5 UTP cabling
● Management console port: RJ-45-to-DB9 cable for PC connections
● Customers can provide power to a switch by using either the internal power supply or the Cisco XPS 2200. The connectors are
located at the back of the switch.
● Internal power supply connector: The internal power supply is an autoranging unit. The internal power supply supports input
voltages between 100 and 240VAC. Use the supplied AC power cord to connect the AC power connector to an AC power outlet.
Normal Operating Temperature and Altitudes:
-5ºC to +45ºC, up to 5,000 feet (1500 m)
-5ºC to +40ºC, up to 10,000 feet (3000 m)
Short-Term* Exceptional Conditions:
-5ºC to +50ºC, up to 5,000 feet (1500 m)
-5ºC to +45ºC, up to 10,000 feet (3000 m)
-5ºC to +45ºC, at sea level with single fan failure
* Not more than following in one year period: 96 consecutive hours, or 360
hours total, or 15 occurrences
Normal Operating Temperature and Altitudes:
-5ºC to +45ºC, up to 6,000 feet (1800 m)
-5ºC to +40ºC, up to 10,000 feet (3000 m)
-5ºC to +35ºC, up to 13,000 feet (4000 m)
Short-Term* Exceptional Conditions:
-5ºC to +55ºC, up to 5,000 feet (1800 m)
-5ºC to +50ºC, up to 10,000 feet (3000 m)
-5ºC to +45ºC, up to 10,000 feet (4000 m)
-5ºC to +45ºC, at sea level with single fan failure
* Not more than following in one year period: 96 consecutive hours, or 360
hours total, or 15 occurrences
With AC Power Supply:
LpA: 43 dbA Typical, 46 dbA Maximum
LwA: 5.2 Bel Typical, 5.5 Bel Maximum
With DC Power Supply:
LpA: 44 dbA Typical, 47 dbA Maximum
LwA: 5.3 Bel Typical, 5.6 Bel Maximum
5% to 95%, non-condensing
Temperature: -40 C' to 70 C'
Altitude: 15,000 ft
Operating: 0.41Grms from 3 to 500Hz with spectral break points of 0.0005
G2/Hz at 10Hz and 200Hz 5dB/octave roll off at each end.
Non-Operating: 1.12Grms from 3 to 500Hz with spectral break points of
0.0065 G2/Hz at 10Hz and 100Hz 5dB/octave roll off at each end.
Operating: 30G, 2ms Half sine
Non-Operating: 55G, 10ms Trapezoid
Data Sheet
Page 18 of 28

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents