Cisco 1811W Release Note page 13

Open Caveats—Cisco CP Express 1.0
This section lists caveats that are open in Cisco CP Express 1.0.
•
•
•
•
•
OL-16652-01
CSCsq31188
Cisco CP Express cannot be installed using a PC running Microsoft Windows XP with Service Pack
(SP) 3.
Workaround: Cisco CP Express can be installed using a PC running Microsoft Windows XP with
SP2, and Microsoft Windows Vista.
CSCsk51555
This caveat is caused by Cisco IOS caveat CSCsl42697. When configuring a radio interface using
the Cisco CP Wireless application, QoS access commands such as max-contention and
min-contention window settings are not delivered to the router.
CSCsk78581
When Cisco CP Express is invoked using HTTPS on a router running Cisco IOS version 12.4(17),
the router crashes.
Workaround: Invoke Cisco CP Express using HTTP, as in the following example:
http://10.10.10.1
CSCsd33430
Cisco CP Express browser windows do not close if the Secure Device Provisioning application is
launched from Cisco CP Express. If you choose Secure Device Provision in the Router Provisioning
screen, the SDP application is launched after you complete the Cisco CP Express wizard and deliver
the commands to the router. After the commands are delivered, Cisco CP Express closes, but the two
browser windows associated with Cisco CP Express do not close automatically. This behavior has
been observed in all browsers.
Workaround: Close these windows manually. However, note that closing these windows manually
also closes the Cisco CP Express application. Therefore, do not close these windows until you have
completed configuring the router using the SDP application.
CSCej01054
The SDM_HIGH security policy may not block Instant Messaging (IM) applications. The
application security feature blocks IM applications using the server deny name command. New
servers may become available, and if they do, IM applications may connect to them.
Workaround: Complete the following steps:
Turn on firewall logging for IM applications. The names of the servers that the IM applications
–
connect to will be revealed in the log.
Use the CLI to block the new servers. The following example uses the server
–
newserver.yahoo.com:
router# config t
router(config)# appfw policy-name SDM_HIGH
router(cfg-appfw-policy)# application im yahoo
router(cfg-appfw-policy-ymsgr)# server deny name newserver.yahoo.com
router(cfg-appfw-policy-ymsgr)# end
router#
Release Notes for Cisco Configuration Professional Express 1.0
Caveats
13