Table of Contents
Advertisement
2.2 Configure Your Router via Quick Start Wizard
Step1
Open the web browser on a PC which is connected to the router and then link
to the gateway IP address of the router (the default setting is 192.168.1.1).
Once your Connection (http://192.168.1.1) is successful, a pop-up window
will open to ask for username and password. Leave the default null value and
press OK to continue.
(Note: If you fail in access to the web configuration, please refer to section 5 "Trouble Shooting" )
Step2
The Main Menu will appear after completing the last step. Click Quick Start
Wizard item in "Basic Setup" Group.(The following figure is in the instance
of Vigor2900VG)
9
Advertisement
Table of Contents
