Removing and installing components
This section provides detailed information on how to remove or install the components from your computer.
Topics:
•
Recommended tools
•
Subscriber Identity Module(SIM) board
•
Base cover
•
Battery
•
Solid State Drive — optional
•
Hard drive
•
Coin cell battery
•
WLAN card
•
WWAN card (Optional)
•
Memory modules
•
Keyboard
•
Heat sink
•
System fan
•
Power connector port
•
Chassis frame
•
System board
•
SmartCard module
•
Speaker
•
Display assembly
•
Display bezel
•
Display hinge cover
•
Display hinges
•
Display panel
•
eDP cable
•
Display back cover assembly
•
Camera
•
Palm rest
Recommended tools
The procedures in this document require the following tools:
● Phillips #0 screwdriver
● Phillips #1 screwdriver
● Small plastic scribe
Subscriber Identity Module(SIM) board
Installing the Subscriber Identification Module (SIM) card
1. Insert a paperclip or a SIM card removal tool into the pinhole [1].
2. Pull the SIM card tray to remove it [2].
3. Place the SIM card on the SIM card tray.
Removing and installing components
3
17