Makita XDT13 Instruction Manual page 50

The following table indicates the operating time on a
single charge.
Battery Cartridge Voltage
Battery
capacity
10.8V
18V
-12Vmax
BL1016
1.5Ah
BL1815N
BL1021B
2.0Ah
BL1820B
BL1830/
3.0Ah
BL1830B
BL1041B
4.0Ah
BL1840B
5.0Ah BL1850B
6.0Ah BL1860B
• To install the battery cartridge, align the tongue on
the battery cartridge with the groove in the housing
and slip it into place. Always insert it all the way until it
locks in place with a little click.
• If you can see the red indicator on the upper side of
the button, it is not locked completely. Install it fully
until the red indicator cannot be seen. If not, it may
accidentally fall out of the tool, causing injury to you or
someone around you.
• Do not use force when inserting the battery cartridge.
If the cartridge does not slide in easily, it is not being
inserted correctly.
• To remove the battery cartridge, sliding it from the tool
while pressing the button on the front of the cartridge.
When the speaker is in low battery, the middle LED
will Àash in red.
AT SPEAKER OUTPUT = 100mW (unit: Hour)
(Approximately)
AUX IN Bluetooth
AUX IN Bluetooth
+USB(2.1A) +USB(2.1A)
12 11 1.0
9.5 9.0 1.5
15 14 1.0
13 12 2.0
18 17 3.0
31 28 2.5
25 24 4.0
32 31 5.5
39 37 6.5
Only for battery cartridges with " B" at the end of the
model number
Indicator lamps Check button
Press the check button on the battery cartridge to
indicate the remaining battery capacity. The indicator
lamps light up for few seconds.