Philips 32PHD5813/55 Service Manual

Philips 32PHD5813/55 Service Manual

Chassis tpm18.7l la

Advertisement

 
 
Chassis name 
TPM18.7L LA 
 
 
 
Published by Eva.chen/SC 1838 Quality
2018
TP Vision Netherlands B.V.
©
All rights reserved. Specifications are subject to change without notice. Trademarks are the
property of Koninklijke Philips Electronics N.V. or their respective owners.
TP Vision Netherlands B.V. reserves the right to change products at any time without being obliged to adjust
earlier supplies accordingly.
PHILIPS and the PHILIPS' Shield Emblem are used under license from Koninklijke Philips Electronics N.V.
Platform 
 
 
MTK5800 
 
 
 
Subject to modification
 
Model name 
32PHD5813/55 
32PHG5813/78 
 
32PHG5813/77 
 
32PHG5833/77 
43PFG5813/78 
43PFG5813/77 
43PFD5813/55 
43PFT5813/57 
43PFG5813/78_AUO 
 
TPM18.7L
 
315378520793
2018-Sep -21

Advertisement

Table of Contents
loading

Summary of Contents for Philips 32PHD5813/55

  • Page 1 Koninklijke Philips Electronics N.V. or their respective owners. TP Vision Netherlands B.V. reserves the right to change products at any time without being obliged to adjust earlier supplies accordingly.   PHILIPS and the PHILIPS’ Shield Emblem are used under license from Koninklijke Philips Electronics N.V.
  • Page 2 Koninklijke Philips Electronics N.V. or their respective owners. TP Vision Netherlands B.V. reserves the right to change products at any time without being obliged to adjust earlier supplies accordingly.   PHILIPS and the PHILIPS’ Shield Emblem are used under license from Koninklijke Philips Electronics N.V.
  • Page 3 • 576i - 24Hz, 25Hz, 30Hz, 50Hz, 60Hz For more specification details of this product, see • 576p - 24Hz, 25Hz, 30Hz, 50Hz, 60Hz www.philips.com/TVsupport • 720p - 24Hz, 25Hz, 30Hz, 50Hz, 60Hz • 1080i - 24Hz, 25Hz, 30Hz, 50Hz, 60Hz •...
  • Page 4   Performance may vary, depending on the capabilities of the mobile device and the software used. Connectivity TV Side • USB 1 - USB 2.0 • USB 2 - USB 2.0 • HDMI 1 in - MHL TV Rear • Digital Audio out - Optical •...
  • Page 5 Refer to the diversity tables for the correct values. two pins of the Mains/AC Power plug. • The correct component values are listed on the Philips • Check the cabinet for defects, to prevent touching of any Spare Parts Web Portal.
  • Page 6 • Mix of lead-free soldering tin/parts with leaded soldering tin/parts is possible but PHILIPS recommends strongly to avoid mixed regimes. If this cannot be avoided, carefully clear the solder-joint from old tin and re-solder with new tin.
  • Page 7   originating from the USA and used e.g. in • Always respect voltages. While some may not be dangerous in themselves, they can cause unexpected LATAM and AP-NTSC countries reactions that are best avoided. Before reaching into a B-TXT Blue TeleteXT powered TV set, it is best to test the high voltage Centre channel (audio) insulation.
  • Page 8 G-TXT Green TeleteXT distance is 6.5 MHz. L' is Band I, L is all H_sync to the module bands except for Band I High Definition LG.Philips LCD (supplier) Hard Disk Drive Loudspeaker HDCP High-bandwidth Digital Content Protection: LVDS Low Voltage Differential Signalling A “key”...
  • Page 9 Serial Peripheral Interface bus; a 4-wire module, implementing the CA system for a synchronous serial data link standard host (e.g. a TV-set) S/PDIF Sony Philips Digital InterFace Power On Reset, signal to reset the uP SRAM Static RAM PSDL Power Supply for Direct view LED...
  • Page 10   Thin Film Transistor toward external amplifier Total Harmonic Distortion Vestigial Side Band; modulation method TMDS Transmission Minimized Differential WYSIWYR What You See Is What You Record: record Signalling selection that follows main picture and Transport Stream sound TeleteXT WXGA 1280 ×...
  • Page 11   3. Mechanical Instructions 3.1 Cable Dressing ECN701 CN9102     SSB (1053)      A  MAIN POWER SUPPLY        (1054)  CN167 ECN408 CN8601 CN605 CN164 Cable dressing (32/43" 5813/5833 series)   ECN164 ECN167 to key&IR ECN605     LOUDSPEAKER  WIFI MODULE   LOUDSPEAKER  KEY BOARD  ...
  • Page 12   3.2 Assembly/Panel Removal 3.2.1 Stand removal 1. Remove the fixation screws [1] that secure the stand. 2. Take the stand bracket out from the set.   3.2.2 IR board Control Unit 1. Unplug the connector from the SSB. Caution: be careful, as these are very fragile connectors! 2.
  • Page 13   3.2.3 Rear Cover Warning: Disconnect the mains power cord before removing the rear cover. 1. Remove fixation screws [2] and [3] that secure the Rear Cover. 2. Unplug the connector [4]. 3. Gently lift the rear cover from the TV. Make sure that wires and cables are not damaged while lifting the rear cover from the set. 2 ...
  • Page 14   3.2.4 Keyboard Control Unit 1. Release the connector [2] from the SSB Board. Caution: be careful, the Keyboard is catch on the Back cover, please be careful to avoid damage the fragile connectors! 2. Remove all the fixation screws from the keyboard control panel [1] and take it out from the Back cover When defective, replace the whole unit.
  • Page 15   3.2.6 Power Supply Unit (PSU) Caution: it is mandatory to remount all different screws at their original position during re-assembly. Failure to do so may result in damaging the PSU. 1. Gently unplug all connectors from the PSU. 2. Remove all fixation screws from the PSU. 3.
  • Page 16   4. Service Modes 4.1 Service Modes The Service Mode feature is split into following parts: Service Alignment Mode (SAM).  Factory Mode.  Customer Service Mode (CSM).SAM and the Factory mode offer features, which can be used by the Service engineer to repair/align a TV set. ...
  • Page 17   With the “LEFT/RIGHT” keys, it is possible to:  – (De) activate the selected menu item. – (De) activate the selected sub menu. – Change the value of the selected menu item. When you press the MENU button once while in top level SAM, the set will switch to the normal user menu (with the SAM mode still active in the ...
  • Page 18   4.3 Factory mode: Purpose To perform extended alignments.  Specifications Displaying and or changing Panel ID information.  Displaying and or changing Tuner ID information.  Error buffer clearing.  Various software alignment settings.  Testpattern displaying.  Public Broadcasting Service password Reset. ...
  • Page 19   Line number for every  line (to make CSM language independent). Set the screen mode to full  screen (all contents on screen is visible). After leaving the Customer Service Mode, the original settings are restored.  Possibility to use “CH+” or “CH-” for channel surfing, or enter the specific channel number on the RC. ...
  • Page 20   5. Software Upgrading, Error code and Panel Code 5.1 Software Upgrading Step 1: Ready for F/W Upgrade 1. Rename the software as “autorun.upg”. 2. Prepare a USB memory (File format: FLAT, Size: 1G~8G). 3. Copy the software to USB flash disk (root directory). Note the version of this F/W before you change the software file name.
  • Page 21   4. Press OK to start software upgrade 5. Upgrade in progress  ...
  • Page 22   Step 3: Check the SW version 1. After burning software, TV will restart. 2. Press “123654”, enter Customer Service Mode to check if the software version is correct Caution: Please make sure that software upgrade is finished before unplug the USB and AC power! 5.2 Error Code 5.2.1 Introduction Error codes are required to indicate failures in the TV set.
  • Page 23    ...
  • Page 24 Press the following key sequence on a standard RC transmitter: “062598” directly followed by MENU and “xxx”, where “xxx” is a 3 digit decimal value of the panel type: see column “Display Code” in below tab. After resetting the Display Code, restart the set immediately. CTN_ALT BOM Panel Type Display Code 32PHD5813/55 TPT320B5-AT011H S011M 32PHG5813/78 TPT320B5-AT011H S011M 32PHG5813/77...
  • Page 25 Trouble shooting 2016年12月10日 2016/4/8 Picture-related Intermittent Ask Photo Picture ? problem ? Menu Smarkt Signal SW latest ? Backlight? issue function? issue SSB+LVDS+Panel Update SW LED working ? PSU/SSB Problem solved ? Sound ? PSU+ Panel Finish SW+SSB...
  • Page 26 Trouble shooting 2016年12月10日 2016/4/8 Audio/Sound- related Intermittent Sound ? problem ? Setting SW latest ? Mute ? issue issue Update SW Extra device Check extra connect? device Problem solved ? Factory setting Finish Sound back ? Setting issue SSB+SPK...
  • Page 27 6.Slow response to user interaction 7.Switches ON by itself 8.Switches Off by itself 9.Stuck in standby mode / unable to start up 10.Stuck on PHILIPS / ANDROID logo 11.CAM not recognized by TV 12.CAM authentication issue 13.Misc CAM issue 14.IP-EPG issues 15.BC-EPG issues...
  • Page 28   7. Electrical Diagram 7.1 Block diagram CN159 U406,U408,U409 DDR3 USB 2.0 USB_P0 CN163,CN165 MT5800 U401 HDMIx2 HDMI CN501(MHL)/CN503 CN603 Tuner IF+/IF- Tuner IF+/IF- Embedded DEMOD TUNER Tuner IP/QP Tuner I/Q(Single-end) U601 Embedded RMII PHY SPEAKER AMP AD87588 CN605 SPEAKER OUT U402 eMMC CN401...
  • Page 29   7.3 Power tree USB_PORT1_5V +5V_USB U716 USB_EN_P1 U713 USB_PORT2_5V TUNER_LNB OPWRSB U717 U202 USB_EN_P2 D709 LNB_EN Vcck AVDD1V2 D710 U704 +12V FB708 D708 OPWRSB +5V_STB DDRV U701 U719 FB_PWR_EN R781 PANEL_VCC +5V_SW AVDD3V3 DVDD3V3 +1.8V FB714 Q702 U707 FB713 Q706 U705 LVDS_PWR_EN...
  • Page 30   7.4 Power layout SSB C786 +5V_SW  L702 +1.5V_DDR  L701 +5V_STB  L732 +3.3V_SB  L731 +5V_USB  FB604 +12V_AUDIO  FB705 +3.3V_TUN  Power SSB Top View  ...
  • Page 31   Power SSB Bottom View  ...
  • Page 32   8. IC Data Sheets 8.1 MT5800VHEJ (IC U401--Scaler)  ...
  • Page 33   8.2 AD87072-LG48NRY (IC U601--Audio)  ...
  • Page 34   8.3 SI2180-B60-GMR (IC U101--Demodulator)  ...
  • Page 35   8.4 ST53CS-6-E--EUROPE (TU101)  ...
  • Page 36   9. Circuit Diagrams 9.1 A 715G7734 PSU (For 32” 5813 Series) 9-1-1 AC Input +18V BD9901 NC/KBJ608G-FUC BD9902 GBL408-C D9110 D9109 SR510-22 SR34H ZD9101 BZT52-B22 +12V_A D9111 +12VS SR510-22 R9130 Q9306 1K OHM L9101 D9112 NC/P1604ED SR510-22 +12V NR9901 C9101 R9302 2.5R...
  • Page 37   9-1-2 LED DRIVER R8615 C8617 22K 1/4W 100PF 500V +18V FB8605 L8602 BEAD VLED+ 47uH D8601 C8601 C8605 SR506 330UF 35V 0.1uF 50V C8621 R8612 R8611 C8623 D8602 0.1uF 50V 100K Q8601: 357G0763100601 or 1N4148 357G0763100605 R8616 0 OHM +-5% 1/8W R8604 33R 1/8W 5% Q8601...
  • Page 38   9.2 A 715G8971 PSU (For 43” 5813 Series) 9-2-1 Main Power R9161 33ohm 1/4W +/-5% H O T C O L D C9162 C9161 R9162 1N5 50V 33ohm 1/4W +/-5% 1N5 50V BD9902 FB9901 R9163 GBL08-C2 BEAD 33ohm 1/4W +/-5% +12V1 +12V R9164...
  • Page 39   9-2-2 LED L8602 FB8602 +22V NC/BEAD D8602 NC/SR506 VLED+ FB8601 L8601 BEAD D8601 33uH SR506 C8601 C8607 R8603 R8604 C8606 C8605 220uF 50V C8603 100K C8604 100N 50V 220uF 50V 220uF 50V R8612 R8605 33K 1/8W 1% 10ohm +/-1% 1/8W R8619 10 OHM D8604...
  • Page 40   9.3 B 715G9356 SSB 9-3-1 System Power 1 I N P U T CN701 + 1 2 V + 5 V _ S W 12V_AUDIO +12V 12V_AL STB_PWR STB_PWR 12V_AL +12V 12V_AUDIO 3V3SB R S B : Normal: High Stand_by: Low +12V R7002...
  • Page 41   9-3-2 System Power 2 P a n e l V C C = 1 2 V +5V_SW +12V PANEL_VCC U S B C754 47pF 50V P A N E L V C C F B 7 1 3 F B 7 1 4 R 7 0 2 4 V o u t 0 .
  • Page 42   9-3-3 Peripheral U401-6 3V3SB OPWRSB 3,4,17 OPWRSB U0TX R e s e t SY S_EEPROM_WP U0TX SY S_EEPROM_WP U0RX OSCL0 DVDD3V3 U0RX OSCL0 OSDA0 OSDA0 AE26 OSDA0 OPCTRL3 OSDA0 OPCTRL3 OSCL0 AH26 POWE__B POWE__B_E LED_PWM1 R4002 47R 1/16W 5% R4016 13,17 OSCL0...
  • Page 43   9-3-4 Audio Interface PWRDN-HP PWRDN-HP U401-3 AR1_ADAC AR1_ADAC AL1_ADAC A n a l o g P o w AL1_ADAC AR0_ADAC HS601 AIN_R0 AR0_ADAC AIN_R0 AIN_R0 AL0_ADAC AIN_L0 AIN_R0 AL0_ADAC AIN_L0 AIN_L0 AVDD3V3 AIN_L0 AR1_ADAC AIN_R1 AR1_ADAC AL1_ADAC AVDD33_ADAC AVDD33_AADC AIN_L1 AL1_ADAC AIN_R2...
  • Page 44   9-3-5 Video Interface/YPbPr/CVBS U401-4 OSCL1 OSCL1 OSDA1 OSDA1 ADCINP_DEMOD Y P b P r & A u d i o ADCINP_DEMOD HSY NC ADCINN_DEMOD ADCINN_DEMOD VSY NC AVDD12_DEMOD AVDD12_DEMOD CN116 VGA_SDA Y _IN_0 DVDD3V3 VGA_SCL IF_AGC PB_IN_0 IF_AGC COM1 TP98 RF_AGC R1301...
  • Page 45   9-3-6 LVDS LVDS_PWR_EN L V D S   LVDS_PWR_EN R1056~R1068 mount 0 ohm. BL_DIMMING 3,13 BL_DIMMING U401-2 V B 1   R1056~R1068 mount 100NF. L V D S AE18 LVDS_SEL TCON0 AF18 AF19 AE0P LVDSTX_AE0P R1056 0R05 1/16W TCON1 AE0P AD17 AE19...
  • Page 46   9-3-7 DRAM U401-1 DDRV D D R 3 # 1 DDRV D D R 3 # 2 RDQM0 RDQM0 RDQM0 RDQS0 RDQS0 A D / C M D a m p i n g RDQS0 RDQS0B F o r M C M D r a m R e s e r v e...
  • Page 47   9-3-8 CI Card 3 V 3 S l o t DVDD3V3 CI_DVDD3V3 CI_A0 CI_A0 CI_A1 CI_A1 CN159 CI_A2 CI_A2 CI_A3 CI_A3 CI_D3 CI_CD1# CI_A4 CD1# CI_A4 CI_D4 CI_MDO3_R CI_A5 CI_A5 CI_D5 CI_MDO4_R CI_A6 C1055 CI_A6 CI_D6 CI_MDO5_R CI_A7 CI_A7 CI_D7 CI_MDO6_R CI_A8...
  • Page 48   9-3-9 MII/GPIO/ServAD2 U401-7 CI_TSCLK CI_TSCLK OSDA0 CI_TSVAL OSDA0 CI_TSVAL CI_A0 DEMOD_RESET OSCL0 CI_TSSY NC G P I O 0 CI_A0 DEMOD_RST OSCL0 CI_TSSY NC CI_A1 CI_TSDATA0 G P I O 1 CI_A1 CI_TSDATA0 CI_A2 DEMOD_TSCLK G P I O 2 CI_A2 DEMOD_TSCLK CI_A3...
  • Page 49   9-3-10 HDMI U401-5 A n a l o g P o w AVDD1V2 +5V_SW A u d i o R e t u r n C h a n n e l ( A R C ) HDMI_CEC HDMI_0_RX_0 HDMI_CEC HDMI_0_RX_0 R5002...
  • Page 50   9-3-11 Tuner/Demod T U N E R +3V3_TUNER T U N E R T u n e r i t h D V B - S / S 2 m o d e l S a m s u n g D N B U 0 2 1 1 2 I H 2 TU101 T U N E R...
  • Page 51   9-3-12 USB/WIFI/RJ45 U401-8 USB_DP_P0 USB_DP_P0 USB_DM_P0 +5V_SW USB_PWR_EN USB_DM_P0 USB_PWR_EN USB_DP_P1 USB_DP_P1 USB_DM_P1 R1193 USB_DM_P1 10K 1/10W 5% USB_DP_P2 OPCTRL2 Wi-Fi_PWR_EN USB_DP_P2 OPCTRL2 USB_DM_P2 AVDD3V3 USB_DM_P2 Q107 OPCTRL8 WOL_ON/OFF OPCTRL8 AO3414 AVDD33_USB AD28 USB_DP_P3 USB_DP_P3 AD27 USB_DM_P3 OPCTRL5 WIFI_IRQn USB_DM_P3 R1195 OPCTRL5...
  • Page 52   9-3-13 IR/Keypad Conector LED_W/B/G R1224 NC/100R 1/16W 5% 5,13 LED_PWM1 C l o s e M T 5 5 8 1 R1216 100R 1/16W 5% CN606 5,13 LED_PWM0 3V3SB NC/CONN R6051 R6052 +5V_SW 3V3SB AL1_ADAC C1302 ZD129 NC/200R 1/16W 5% NC/510R 1/16W 5% OPWRSB AZ5123-01H.R7G...
  • Page 53   9-3-14 VCCK&DVSS U401-11 VCCK VCCK U401-10 DVSS DVSS DVSS DVSS DVSS DVSS Y 16 Y 21 DVSS DVSS VCCK VCCK DVSS DVSS VCCK VCCK Y 17 Y 22 DVSS DVSS VCCK VCCK AA22 DVSS DVSS VCCK VCCK Y 18 AB22 DVSS DVSS...
  • Page 54   9.4 J 715G8623 IR/LED Panel (For 5813 Series) 9-4-1 IR & LED & Light Sensor Light Sensor CN201 R223 R224 R225 R226 R227 R228 R229 I2C ADDR DVD3V3 LED_R DVD3V3 JSA-1130 0x44 RC-IR C222 1uF 10V JSA-1130 0x45 3V3SB LS_SCL R225 0R05 1/16W...
  • Page 55   9.5 J 715G8009 IR/LED Panel (For 5833 Series) Stand LED Light Sensor 9-5-1 IR & LED & Light Sensor L i g h t S e n s o r S t a n d b y L E D 3V3SB CN201 LED_R...
  • Page 56   9.6 E 715G9740 Keyboard control panel 9-6-1 Key Direction switch Key function Resistance Voltage Range JOYSTICK Center 2-5 short Menu 0 to 0.22V Right 1-5 short 0.5V 0.39 to 0.60 V CN01 KEY 1 Left 4-5 short 0.81V 0.67 to 0.95 V Down 3-5 short VOL-...
  • Page 57   10. Styling Sheets 10.1 5813/5833 series 32" Wifi02 1053 0040  1050  1184 1054 0030  0063 1057 1056 0036 0050     ...
  • Page 58   10.2 5813 series 43" WIFI02 1050  0040 1053 1184 0063 1057 1056 1054 0036 0030  0050      ...
  • Page 59    ...

Table of Contents