AEG DVD 4528 TFT Instruction Manual And Guarantee page 49

System settings
05-DVD4528TFT_GB.indd 49 05-DVD4528TFT_GB.indd 49
TV Display
Here you can adapt the output of the DVD-Player to the TV-aspect.
Concerning the background: If you do not have a wide screen TV the TV-
aspect will be 4:3. However, most feature fi lms have an aspect of 16:9,
the image is therefore too wide for the TV-screen.
Here you can specify how the replay of the fi lm is to be adapted to the
playback device:
4:3 Panscan:
You will only see the middle section of the fi lm. The borders will be
cut off.
4:3 Letterbox:
You will see the complete width of the fi lm. The fi lm is thus reduced
in size, whereby black bars appear below and above the fi lm.
16:9 Wide:
Select this option if you use a wide screen TV for replay. Please note
that fi lms, that have been recorded with TV-aspect 4:3 can still be
replayed using aspect 4:3. This means, that replaying this fi lm will
not require the complete wide screen area of the television.
Wide Squeeze:
Select this option if you use a wide screen TV for replay. This setting
is used to adapt fi lms in 4:3 format to the aspect ratio of the wide-
screen television set. (Preferred setting for the built-in screen.)
NOTE: The setting „4:3 Panscan" is not supported by all DVDs.
Angle Mark (Camera Angle)
If the DVD contains sequences recorded from different camera angles
you can use the ANGLE button (Fig. 2/25) to select the various camera
angles. This function is only available if the DVD contains scenes with
various camera angles.
Before you can use this function it has to be activated.
On:
The angle symbol is shown on the screen.
Off:
No angle symbol is shown on the screen.
OSD Language
Here you can select the language of the on-screen displays.
English
49
30.11.2007 9:50:07 Uhr 30.11.2007 9:50:07 Uhr