Troubleshooting; Storage And Disposal; Technical Data - Husqvarna EPOS Operator's Manual

Reference station
Hide thumbs Also See for EPOS:
Table of Contents

Advertisement

Available languages

Available languages

4.2 Clean the product
WARNING:
from the power supply before any
maintenance or cleaning.
5.1 LED indicator lamp on the reference station
Light
Green flashing light
Green solid light
Red flashing light
White flashing light
6.1 Storage
If you store the reference station indoors, keep the arm
installed at the post or wall to be able to install the
reference station on its original position again.
If you keep the reference station outdoors during the
winter, we recommend you to keep the power supply
connected.

7.1 Technical data

Dimensions
Length, max length including plate for post installation cm / in.
Width, cm / in.
Height, cm / in.
Weight, reference station kg / lb
Weight, arm kg / lb
1512 - 001 - 11.11.2020
Disconnect the product

5 Troubleshooting

Status
Startup of the reference station. This can take some minutes.
In operation.
The reference station is not working due to an error.
Firmware update is necessary. Speak to your local Husqvarna representative.

6 Storage and disposal

7 Technical data
CAUTION:
Do not use a high-pressure
washer to clean the product and reference
station. Do not use solvents for cleaning.
If necessary, clean the reference station with a moist
cloth.
6.2 Disposal
Obey the local recycling requirements and applicable
regulations.
36 / 13.8
19 / 7.5
36 / 13.8
0.88 / 1.9
0.33 / 0.73
Troubleshooting - 9

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents