Connect The Scanner - Canon CanoScan 8400F Quick Start Manual

Connect the Scanner

• Make sure that the scanning unit is unlocked. (P. 6)
1
Attach the FAU cable to the FAU connector on the back of the scanner (
2
Connect the scanner to the computer with the supplied USB interface cable ( ).
Wide Flat Connector
3
Attach the supplied AC adapter to the scanner.
4
Press ( I ) to turn the power on.
• Only use the USB interface cable and the AC adapter provided with the scanner. Use of
other cables or adapters may lead to a malfunction.
• When the scanner is connected to the USB 1.1 port on Windows XP, do not worry if the
"HI-SPEED USB Device Plugged into non-HI-SPEED USB Hub" message appears. You can
operate the scanner in this condition without problems.
USB Interface Cable
AC Adapter
USB Connector
Connect the Scanner
).
Small Square Connector
7