Canon BJC-S820D User Manual page 66

Eject the Memory Card.
When selected, the indicator lamp starts blinking, a message will appear, and
the printer gets ready for memory card ejection. When the indicator lamp goes
off, press the Eject button and remove the memory card.
Note
If you are using Windows XP or Windows 2000, the computer recognizes
the card slot as a removable disk. Therefore, if you want to turn off the
printer while you are using the computer, perform the hardware removal
operation by using the "
Change the drive's read/write attribute.
Displays the USB Memory Card Settings dialog box where you can change the
mode (Read-only mode, or Read/write enabled mode) of the card slot by
following the on-screen instructions. By default, the mode is set to read only.
Before changing the mode, remove the memory card by using Eject the
Memory Card option.
Auto-start an application when a card is inserted./Do nothing when a card
is inserted.
Determines whether an application will start each time the memory card is
inserted.
Note
You can set the application to be started in advance with the Auto-Start
Properties function.
" icon found on the right side of the task bar.
Setting the Application to Be Started
Using the Memory Card Startup Utility (Windows)
Starting the Memory Card Startup Utility 66