Targus ASP07 Quick Start

Introduction
Congratulations on your purchase of the Targus Mobile Security Lock for iPod
specifically to be used as a mobile solution with your backpack, notebook bag, purse or stationary object. It
provides an affordable way to secure their iPod while at work or on the go. The Mobile lock is compact, flexible
and comes with a unique housing designed to facilitate the use of the retractable head and allow for ease of
storage in backpacks, notebook bags or other carrying cases.
Features
• Dock connector lock allows for ease of use and stationary security
• User resetable 3-Digit combination for increased security
• 2.5 FT Galvanized steel cable secures iPod to any secure stationary object
Package Content
Along with the User Guide, the package includes:-
• Targus Mobile Security Lock for iPod
Securing the Mobile Security Lock
Select an object in the room to which you will secure your iPod with the Mobile
Security Lock. Choose a large, heavy piece of furniture such as a table or desk, or
an immovable fixture such as a closet hanging bar.
1. Push the lock out from the hole at the back of the casing.
2. Press and hold the casing release button, and pull the cable out lightly.
3. Take the lock and wrap it around the selected object to create a loop.
4. Feed the lock through the back hole of the casing as shown. Wrap the cable
around a part of the object that will deter a potential thief from slipping the cable
off (for example, a table or a desk leg with a cross bar or a drawer handle).
Locking the Mobile Security Lock to your iPod
NOTE: TO PROPERLY SECURE THE LOCK TO THE iPOD, ENSURE THAT THE LOCK CLICKS FIRMLY INTO PLACE, INDICATING THAT THE LOCK TEETH HAVE TAKEN PLACE
IN THE iPOD. ONE CAN LINE UP THE LOCK-HEAD PROPERLY BY MATCHING THE TARGUS LOGO AND SILVER LINES ON THE LOCK HEAD.
1. Using the dials, enter the correct combination.The combination appears in the numeric slots just below the Targus logo.
2. Initial preset combination is 000, and should be changed to a personalized combination for increased security.
3. Secure your iPod by inserting the locking head as you depress both of the designated notches located on each side button.
Press near the top of the side release buttons.
4. For security purposes, turn the combination dials to prevent access to your personalized combination code.
Unlocking the Mobile Security Lock
WARNING: DO NOT ATTEMPT TO REMOVE THE MOBILE SECURITY LOCK WITHOUT USING THE COMBINATION, OR IT WILL CAUSE PHYSICAL DAMAGE TO YOUR iPOD.
1. Using the dials, enter the correct combination.
2. The combination is visible through the numeric slots, and the proper input side is noted by the Targus logo and silver notches.
3. To release the lock, press on the designated notches on both buttons and pull the locking head away from the iPod.
Press near the top of the side release buttons.
4. Remove the Mobile Security Lock from your iPod 30-pin slot.
Changing the Mobile Security Lock Combination
NOTE: HOLD THE MOBILE SECURITY LOCK FIRMLY FOR ADDITIONAL STABILITY WHILE INSERTING OR REMOVING THE LOCK. INPUT THE CURRENT COMBINATION PRIOR
TO BEGINNING THE RESET / CODE CHANGE PROCESS.
1. Using a small flat-head screwdriver or similar object, push in and rotate the reset screw 90 degrees counter-clockwise
so that the screw's groove appears vertical and aligns with the combination line mark as shown.
2. Using the dials, enter the new combination.
3. Using a small flat-head screwdriver or similar object and rotate the reset screw 90 degrees clockwise so that
the screw's groove appears horizontal.
4. Press and hold the locking buttons of the lock and insert the Mobile Security Lock into your iPod.
5. Turn the dials to conceal your combination.
Specifications
General
Weight: 2.75 ounces (77 g) overall
Technical Support
For technical questions, please visit:
Internet: http://www.targus.com/support.asp
Product Registration
Targus recommends that you register your Targus accessory shortly after purchasing it. To register your Targus accessory, go to:
http://www.targus.com/registration.asp
You will need to provide your full name, email address, phone number, and company information (if applicable)
Warranty
Targus warrants this product to be free from defects in materials and workmanship for one year. If your Targus accessory is found to be
defective within that time, we will prompty repair or replace it. This warranty does not cover accidental damage, wear and tear, or
consequential or incidental loss. Under no conditions is Targus liable for loss of, or damage to a computer; nor loss of,
or damage to, programs, records, or data; nor any consequential or incidental damages even if
Targus has been informed of their possibility. This warranty does not affect your
statutory rights.
Features and specifications are subject to change without notice. All trademarks and registered trademarks are the property of their respective owners. © 2006, Targus Group International, Inc. and Targus, Inc. ASP07CA / 400-0321-002A
iPod ® is a trademark of Apple Computer, Inc., registered in the US, and other countries.
Locking Device
Dimensions: 1.22 x 1.17 x 0.81 inches(31 x 29.9 x 20.8 mm)
Color: Black Nickel
Email:
mobile security
®
lock for iPod
® . This mobile lock is designed
Push
Back of ASP07's casing Lock out from casing
Cable
Length:
Material:
info.cn@targus.com
Push and Hold
Pull
iPod (not included)
2 feet 6 inches (0.762 m)
Vinyl coated steel
Quick Start
Début Rapide