Huawei B525 Manual page 33

The way how to register is different for each type of device, only needs
to be done once, and can only be described in a global way, as follows:
1. In the operating of the device, search for a menu with "Networks" or
"Connections" and then "Wireless" or "Wi-Fi".
2. Start searching for Wi-Fi networks here.
3. Watch whether Wi-Fi devices are found in which the network-name
(=SSID) contains "HUAWEI-B525".
4. You will then see (up to) 2 Wi-Fi networks of the Mobile Internet
Router.
5. Choose one of the two.
6. The device will now ask for the Wi-Fi Password, this can also be
called "WEP-key" or "WPA-key" or "WPA2-key".
7. This password can be found on the sticker at the bottom of the
Mobile Internet Router, in the bottom line, named "Wi-Fi Key:
xxxxxxxxxxx", and is a mix of capitals, small letters and numbers.
8. This password must be entered identically; then choose "OK" or
"Connect", and after that the device is registered to the Mobile Internet
Router via Wi-Fi.
9. The registered device now has access to the internet, and it will
always register to the Mobile Internet Router automatically whenever it
is within reach.
Using a USB-storage device
In the USB-port [i] at the back of the Mobile Internet Router, you can
connect a USB storage device, like a USB-memory-stick or hard disk
(the last one when necessary with its own power-supply). After that it is
possible to share the content of this USB-storage device with the users
that are connected to the Mobile Internet Router, either users that are
connected via a network cable or the ones that are registered via Wi-Fi.
Basically this can be all kinds of files that can be on a USB-storage
device like for example pictures, videos, music and documents.
The user who want to do that, have to be connected to the Mobile
Internet Router via the designated App or the Web Management Page,
see the next chapters for that.
5