Shooting With Servo Af - Canon Powershot SD1400 IS DIGITAL ELPH User Manual

Shooting with Servo AF

While the shutter button is pressed halfway, the focus and exposure will
continue to adjust, allowing you to take pictures of moving subjects without
missing a shot.
•
The camera may not be able to focus in some conditions.
•
If a correct exposure cannot be obtained, the shutter speed and
aperture value appear in orange. Release your finger from the shutter
button, then press it again halfway.
•
In low light conditions, AF frames may not turn blue even after pressing
the shutter button halfway. In this case, focus and exposure are locked.
•
The [AF-Point Zoom] option in the 4 tab is not available in Servo AF
mode.
•
Not available when using Self-Timer (pp. 67, 80, 81).
Choose [Servo AF].
● Press the n button and choose
[Servo AF] from the 4 tab, and press the
qr buttons to choose [On].
Focus.
●
The focus and exposure will be
maintained where the blue AF frame
appears while you press the shutter
button halfway.
87