Using The Wireless Controller/Tally Lamp - Canon Vistura User Manual

Using the Wireless Controller/Tally Lamp

The supplied wireless controller can
operate the camera from a distance of
E
up to 16 feet (5 m). Point it at the
camera's remote sensor while you press
the buttons.
The tally lamp lights up to let you
know that the camera is in range and
responding to your commands.
There are five functions which can only
be operated using the wireless
controller:
• Special playback (p. 20)
• TV-screen displays (p. 92)
• Data code on/off (p. 35)
• Photo/Date search (p. 37)
• 12 bit Audio output (p. 76)
Inserting batteries
Insert two AA batteries, following the
= and - markings. Be careful not to
reverse the polarity of the batteries.
Notes:
• When using the wireless controller in brightly lit places or outdoors, the
effective range will be less.
• The camera may have difficulty picking up the remote control signals at
extremely close range.
• Do not leave the controller exposed to direct sunlight, or in hot or humid places.
• When the batteries run out, replace both batteries at the same time.
30