Troubleshooting; How To Proceed For Troubleshooting; Fault Table; Technical Data - Bosch Rexroth RE 07601-B Operating Instructions Manual

Manifolds and modules
Table of Contents

Advertisement

Fault
External leakage
No function

14 Troubleshooting

14.1 How to proceed for troubleshooting

Always work systematically and purposefully, even when under time pressure. Ran-
dom and imprudent disassembly and readjustment of settings can, in the worst-
case scenario, result in the inability to determine the original cause of error.
First, get a general overview of how your product functions in conjunction with
the overall system.
Try to find out whether the product has worked properly in conjunction with the
overall system before the error occurred first.
Try to determine any changes of the overall system in which the product
is integrated:
– Were there any changes to the product's application conditions or area
of application?
– Were there any changes (e.g. refittings) or have repairs been carried out at the
overall system (machine/system, electrical systems, control) or at the product?
If yes: What were they?
– Was the product or machine used as intended?
– How did the fault become apparent?
Try to get a clear idea of the cause of the error.
If you could not remedy the occurred error, please contact one of the addresses
you find at
http://www.boschrexroth.com/adressen.

14.2 Fault table

Manifolds and modules are usually not sensitive to faults if the prescribed applica-
tion conditions and hydraulic fluid quality are complied with.
Possible causes
Seals at connection surface damaged
Other leakage
Electrical connection interrupted
Cable break
Replace connection cable.
In case of faults in individual components, please consult the product description or
operating instructions of the components.

15 Technical data

The technical data is contained in the relevant installation drawing of your manifold/
the individual valves.
Remedy
Remove the hydraulic component and replace
the seals.
Replace leaky hydraulic valves.
Check whether the electrical plug-in connectors
are correctly and completely mounted.
Replace connection cable.
Replace the connector.
RE 07601-B/12.2013, manifolds and modules, Bosch Rexroth AG
Troubleshooting
31/36

Advertisement

Table of Contents
loading

Table of Contents