Toshiba E-STUDIO2010AC Operator's Manual page 15

2.TopAccess
 VNC Setting
You can use a computer or a mobile terminal such as a tablet and a smartphone to check and operate the control
panel.
 The default password for this VNC function is "d9kvgn". Be sure to change it before using this function. Specify a
password with six or more and eight or less alphanumeric letters.
 You can use only one computer or mobile terminal for the VNC function.
 It is recommended that you use UltraVNC (client software) on Windows 8.1 or later for the VNC function.
 When this VNC function is enabled, the equipment does not enter the Super Sleep mode.
1
2
3
4
5
6
7
8
Item name
1 Enable VNC Function
Old Password
2
3 New Password
4 Retype Password
5 Enable SSL/TLS
Enable Remote Panel
6
Operation
For the details about [Enable Remote Panel Operation], contact your service technician or representative.
Open Range
7
8 Intermediate Server Address
Select whether the VNC function is enabled or disabled.
 Enable — Enables the VNC function.
 Disable — Disables the VNC function.
Enter the old password for the VNC function.
Enter a new password for the VNC function.
Retype the new password for the VNC function.
Select whether the SSL (Secure Sockets Layer)/TLS (Transport Layer Security)
is enabled or disabled for the VNC function.
 Enable — Enables the VNC function.
 Disable — Disables the VNC function.
Select whether the remote panel operation function is enabled or disabled.
 Enable — Select this to enable the remote panel operation function.
 Disable — Select this to disable the remote panel operation function.
Select the disclosure range of the remote panel operation function.
 Admin — Permits the administrator.
 User — Permits general users.
Enter an IP address and port number of the relay server used for the remote
panel operation.
Description
[Administration] Tab 15