Philips FW-V28 Manual page 13

All manuals and user guides at all-guides.com
Discs for playback
This system can playback all audio CD,
finalized audio CD-Recorder format discs.
Loading the Disc Changer
1 Press VCD to select VCD/CD mode.
2 Press OPEN•CLOSE.
™ The disc carousel tray slides out.
3 Load a disc with the printed side up in
the right tray.
• You can load another disc in the left
tray.
• To load the third disc, press the DISC
CHANGE button.
™ The disc carousel tray will rotate
until the empty tray is ready for
loading.
™ Playback will always start with the
disc in the inner disc tray.
4 Press OPEN•CLOSE to close the disc
carousel tray.
™ The total number of tracks and the
playing time of the last selected disc
appear on the display.
Note:
– To ensure good system performance,
wait until the disc changer completely
reads the disc(s) before proceeding.
Untitled-1 13
Disc Direct Play Disc Change
You can play a disc directly by pressing the You can change the outer two discs while
DISC 1, DISC 2 or DISC 3 button. the third inner disc is stopped or is playing.
1 Press DISC CHANGE.
Playing a normal disc
™ The disc carousel tray slides out.
2 Replace the discs in the left and right
For normal VCD:
disc trays.
Ensure that the system is switched to
• If you press DISC CHANGE again
the corresponding PAL or NTSC
during playback, the disc will stop
system of your TV set (except multi-
playing.
system TV).
™ The disc carousel tray will rotate
1 Press PLAYÉ Å to start playback.
™ The disc tray, track number and
elapsed playing time of the current
3 Press OPEN•CLOSE to close the disc
track appear on the display.
carousel tray.
• To interrupt playback, press PAUSE
É Å .
Selecting a desired track
™ The playing time flashes.
• To resume playback, press PLAYÉ Å
Selecting a desired track when
again. playback is stopped
2 To stop playback, press Ç.
• Press digit 0 – 9 on the remote control
to select the desired track.
Note:
™ Playback will start immediately for
– During Disc Reading mode, if you press
any button, " PLEASE WAIT " will be
™ The selected track number and
displayed.
Selecting a desired track during
playback
• Press í or ë (or digit 0-9 on the
remote control) until the desired track
appears on the display.
™ The selected track number and
elapsed playing time appear on the
display.
• If you press í once it will skip to the
beginning of the previous track and play
the track.
until the inner tray is rotated out and
Searching for a particular
is ready for changing.
passage during playback
• Press à or á to select 4 different
search speed.
™ "FRX1" ; "FRX2" ; "FRX3" or
"FRX4" is displayed on the TV
screen when you select a fast rewind
search.
™ "FFX1" ; "FFX2" ; "FFX3" or
"FFX4" is displayed on the TV
screen when you select a fast
the selected track.
forward search.
™ Normal playback will begin at the
elapsed playing time appear on the
end of the fast rewinding or
display.
forwarding of the selected track.
• Play returns to normal when PLAYÉ Å
is pressed or when a new track is
selected.
31/05/2001, 11:35 AM
CD - VCD
13
3139 116 20021