Sony LSPX-102E26 Reference Manual

LED Bulb Speaker
Reference Guide
Guide de référence
LSPX-102E26
©2016 Sony Corporation Printed in Japan
http://www.sony.net/
English LED Bulb Speaker
Before operating the system, please read this guide thoroughly and retain it
for future reference.
Owner's Record
The serial number is located on the screw base.
Record the serial number in the space provided below. Refer to them
whenever you call upon your Sony dealer regarding this product.
Model No. LSPX-102E26
Serial No.
WARNING
To reduce the risk of fire or electric shock, do not expose this
apparatus to rain or moisture.
To reduce the risk of fire, do not cover the bulb region of the appliance with
newspapers, tablecloths, curtains, etc. Do not expose the appliance to naked
flame sources (for example, lighted candles).
To reduce the risk of fire or electric shock, do not expose this apparatus to
dripping or splashing, and do not place objects filled with liquids, such as
vases, on the apparatus.
The unit is not disconnected from the AC power source (mains) as long as it is
connected to the wall outlet, even if the unit itself has been turned off.
FOR SAFETY
ADDED WEIGHT OF THE DEVICE MAY CAUSE INSTABILITY OF A FREE STANDING
PORTABLE LUMINAIRE.
USE ONLY WITH A PORTABLE TABLE LAMP THAT IS PROVIDED WITH A SHADE.
THIS DEVICE IS NOT INTENDED FOR USE WITH EMERGENCY EXITS.
This device is not intended for use with light fixtures that have
a dimming feature, emergency lights, exit lights, or HID lamp
fixtures (mercury lamps, etc.).
Doing so may cause smoke, circuit damage, or other damage.
Some other types of light fixtures may not be usable, depending on the size,
heat conditions, and other circumstances.
CAUTION
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
Do not expose batteries or appliances with battery installed to excessive
heat, such as sunshine and fire.
WARNING
• DO NOT INGEST BATTERY, CHEMICAL BURN HAZARD
• The remote control supplied with this product contains a coin/button cell
battery. If the coin/button cell battery is swallowed, it can cause severe
internal burns in just 2 hours and can lead to death.
• Keep new and used batteries away from children. If the battery
compartment does not close securely, stop using the product and keep it
away from children.
• If you think batteries might have been swallowed or placed inside any part
of the body, seek immediate medical attention.
CAUTION
The following FCC/IC statement applies only to the version of this
model manufactured for sale in the USA and Canada.
may not comply with FCC/IC technical regulations.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
NOTE:
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to
4-579-895-13(1)
which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
The transmitter must not be co-located or operated in conjunction with any
other antenna or transmitter.
This equipment complies with FCC/IC radiation exposure limits set forth for an
uncontrolled environment and meets the FCC radio frequency (RF) Exposure
Guidelines and RSS-102 of the IC radio frequency (RF) Exposure rules. This
equipment should be installed and operated keeping the radiator at least
20 cm or more away from person's body.
This device complies with Part 15 of FCC Rules and Industry Canada's
license-exempt RSSs. Operation is subject to the following two conditions: (1)
this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
For customers in the USA and Canada
Perchlorate Material - special handling may apply, See
www.dtsc.ca.gov/hazardouswaste/perchlorate
Perchlorate Material : Lithium battery contains perchlorate
Precautions
Note when using with a mobile phone
• For details on operation of your mobile phone when receiving a telephone
call while transmitting the sound using the BLUETOOTH connection, refer to
the operating instructions supplied with the mobile phone.
On temperature rise
• If the product is used for an extended period of time, the temperature of the
product will rise. This is not a malfunction.
On placement
• Do not leave the speaker in a location near heat sources, in a place subject
to direct sunlight, excessive dust, moisture, rain, or mechanical shock.
• Do not leave any objects susceptible to magnetism (cash cards, floppy disks
with magnetic coding, etc.) near the speaker.
• Do not splash water onto this product. The product is not waterproof.
Take special care in the following situations:
– In the washroom, bathroom, or any other place where the product is at
risk of getting wet
– In areas subject to rain, snow, or high humidity
• If turned on near a radio, TV, or other audio or visual device, there may be
noise. (When there is noise, separate the lamp from the other device by at
least 1 meter.)
• If turned on near a device (TV, air conditioner, etc.) that uses an infrared
remote control, the remote control may not work properly.
• Avoid using the product in places where sulfur is prevalent (such as a hot
spring). Doing so can cause the optical qualities to malfunction.
On cleaning
• Do not use alcohol, benzine, or thinner to clean the product.
On handling
• Do not rinse, dismantle, or modify the product. The LED component cannot
be replaced.
• Use in a location with an ambient temperature of 5 °C to 40 °C (41 °F to
104 °F).
• If the product is installed in a fixture that is enclosed or if the area in or
around the fixture heats up, the service life of the product will shorten, and
the brightness may automatically lower to reduce power.
• Before operating the system, be sure that the operating voltage of the
system is identical with that of your local power supply.
• Do not stare into the light for extended periods of time. Doing so may
negatively affect your eyes.
• Do not press against or cause impact to the speaker section of the main
unit.
Others
• Because the brightness and the light color of the LED component may vary,
the brightness and light color of two products may be different, even if they
are the same type.
• The brightness, light color, central light intensity, and distribution of light
(distribution of luminous intensity) are not the same as for an incandescent
light bulb.
• The amount of time that it takes for the light to turn on and off may be
slower than for a regular light bulb.
• The product may not work in conjunction with motion sensor switches and
other automatic light switches and off timers.
• Before installation and use of the product, confirm that the light fixture has
not deteriorated.
• The sound quality of the speaker depends on the type, shape, and location
of the light fixture.
On Copyrights
• The BLUETOOTH
Inc. and any use of such marks by Sony Corporation is under license.
• iPhone, iPod, iPod classic, iPod nano, and iPod touch are trademarks of
Apple Inc., registered in the U.S. and other countries.
• "Made for iPod" and "Made for iPhone" mean that an electronic accessory
has been designed to connect specifically to iPod or iPhone respectively,
and has been certified by the developer to meet Apple performance
standards. Apple is not responsible for the operation of this device or its
compliance with safety and regulatory standards. Please note that the use
of this accessory with iPod or iPhone may affect wireless performance.
• Google Play™ and Android™ are trademarks of Google Inc.
• Other trademarks and trade names are those of their respective owners.
What is BLUETOOTH wireless
technology?
BLUETOOTH wireless technology is a short-range wireless technology that
enables wireless data communication between digital devices, such as a
computer and digital camera. BLUETOOTH wireless technology operates within
a range of about 10 m.
You do not need to use a cable for connection, nor is it necessary for the
devices to face one another, such is the case with infrared technology. For
example, you can use such a device in a bag or pocket.
BLUETOOTH standard is an international standard supported by thousands of
Other versions
companies all over the world, and employed by various companies worldwide.
Maximum communication range
Maximum communication range may shorten under the following conditions.
– There is an obstacle such as a person, metal, or wall between the system
and BLUETOOTH device.
– A wireless LAN device is in use near the system.
– A microwave oven is in use near the system.
– A device that generates electromagnetic radiation is in use near the
system.
– The transmitter is connected to other BLUETOOTH devices.
Interference from other devices
Because BLUETOOTH devices and wireless LAN (IEEE802.11b/g/n) use the
same frequency, microwave interference may occur and resulting in
communication speed deterioration, noise, or invalid connection if the system
is used near a wireless LAN device. In such a case, perform the following.
– Use the system at least 10 m away from the wireless LAN device.
– If the system is used within 10 m of a wireless LAN device, turn off the
wireless LAN device.
For the state of California, USA only
®
word mark and logos are owned by the Bluetooth SIG,
Interference to other devices
Microwaves emitting from a BLUETOOTH device may affect the operation of
electronic medical devices. Turn off the system and other BLUETOOTH devices
in the following locations, as it may cause an accident.
– where inflammable gas is present, in a hospital, train, airplane, or a gas
station
– near automatic doors or a fire alarm
Notes
• To be able to use the BLUETOOTH function, the BLUETOOTH device to be
connected requires the same profile as the system's.
Note also that even if the same profile exists, devices may vary in function
depending on their specifications.
• Due to the characteristic of BLUETOOTH wireless technology, the sound
played on the system is slightly delayed from the sound played on the
BLUETOOTH device during music playback. Particularly when receiving
sound for a video, the sound may be later than the visual.
• This system supports security capabilities that comply with the BLUETOOTH
standard to provide a secure connection when the BLUETOOTH wireless
technology is used, but security may not be enough depending on the
setting. Be careful when communicating using BLUETOOTH wireless
technology.
• We do not take any responsibility for the leakage of information during
BLUETOOTH communication.
• A device featuring the BLUETOOTH function is required to conform to the
BLUETOOTH standard specified by Bluetooth SIG, and be authenticated.
Even if the connected device conforms to the above mentioned BLUETOOTH
standard, some devices may not be connected or work correctly, depending
on the features or specifications of the device.
• Noise or sound skips may occur depending on the BLUETOOTH device
connected with the system, the communication environment or the usage
environment.
Specifications
LED section
Total flux 500 lumens
Power consumption 8.6 W
Light color Warm white (2700K)
Screw base E26 type screw base
Distribution of luminous intensity
Semi-omni distribution
Speaker section
Speaker system Approx. 40 mm (1.6 in) dia.
BLUETOOTH
Communication System
BLUETOOTH Specification version 4.1
Output BLUETOOTH Specification Power Class 1
Frequency band 2.4 GHz band (2.4000 GHz - 2.4835 GHz)
Modulation method FHSS
Compatible BLUETOOTH Profiles* 1
A2DP (Advanced Audio Distribution Profile)
AVRCP (Audio Video Remote Control Profile)
Supported Codecs* 2 SBC* 3 , AAC
Content protection SCMS-T method
Transmission range (A2DP)
20 Hz - 20,000 Hz (Sampling frequency 44.1 kHz)
1
* BLUETOOTH standard profiles indicate the purpose of BLUETOOTH
communication between devices.
* 2 Codec: Audio signal compression and conversion format
* 3 Subband Codec
General
Power AC 120 V 60 Hz
Operating environment and temperature
Indoor at 5 °C to 40 °C (41 °F to 104 °F)
Dimensions (including projecting parts)
Approx. 61 mm dia. × 116 mm (2.4 in dia. × 4.6 in)
Mass Approx. 198 g (7 oz)
Supplied accessories
Remote control (1)
Lithium battery for remote control (CR2032,
pre-installed, for testing) (1)
Startup Guide (1)
Reference Guide (this document) (1)
Warranty card (1)
iPhone/iPod models that can use SongPal with
this product
Compatible model BLUETOOTH®
iPhone 6s Plus 
iPhone 6s 
iPhone 6 Plus 
iPhone 6 
iPhone 5s 
iPhone 5c 
iPhone 5 
iPhone 4s 
iPod touch (6th generation) 
iPod touch (5th generation) 
as of April 2016
SongPal is compatible with iPhone and iPod touch only.
Design and specifications are subject to change without notice.