Maytag W11459731D User Manual page 7

ASSISTED BOIL
The ideal function to manage the heating of water 8-17 cups
(2 L-4 L) to a boiling temperature. At the end of the heating stage,
the cooktop will make a sound to alert you that it is time to move
to the next cooking stage. Press the "OK" button to confirm that
the food is going to be placed in the pot and the cooktop will
move to the next stage. The system is able to monitor most of the
cooking process, but it is always necessary to stay present while
the cooktop is in use and adjust the power level, if necessary.
It is recommended to use this optional function with the
required accessory. (See Assistance or Service section to order
Accessories).
ASSISTED PAN FRYING
The ideal function for preheating an empty pan or a pan with oil
up to a maximum height of 3/8" (1 cm) to the best temperature
for frying. At the end of the heating stage, the cooktop will
make a sound to alert you that it is time to move to the next
cooking stage. The cooktop will stabalize the temperature and,
if necessary, adjust to keep consistent. Press the "OK" button
to confirm that the food is going to be placed in the pan then
the cooktop will move to the next stage. It is best to use this
function when both the pan and oil are at room temperature.
It is recommended to use this optional function with the
required accessory. (See Assistance or Service section to order
Accessories).
POTS/PANS FOR THE ASSISTED COOKING
The optional Assisted Boil and optional Assisted Fry functions
require an accessory pot and/or pan sold separately.*
W11463464 Pot
W11463466 Frying Pan
*Visit Whirlpool.com/accessories or call the Customer
eXperience Center to purchase. See the Assistance or Service
section for more information.
IMPORTANT:
The sensors for the assisted cooking functions have been
■
configured specifically for the recommended pans.
It is important to match the size of the pan to the size of the
■
cooking zone.
Using pots/pans of the incorrect size or poorly positioning
■
pans on the cooking zone may cause limited activation of the
sensors.
Pots/pans from other manufacturers may not perform
■
well. They may heat to a temperature above or below the
programmed temperature setting. If using a pan that is not
the recommended accessory, monitor your cooking process
closely and switch to a manual mode if necessary.
Always keep the pot/pan centered on the element.
■
It is recommended to leave the accessory stationary during
■
the heating phase in order to obtain a more accurate control.
Always wait for the acoustic warning before inserting the food
■
and start from cold only with any seasoning.
In case of repeated cooking, it is advisable not to turn off
■
the automatic function, but to continue cooking, letting the
control maintain the correct temperature.
If possible, avoid using the assisted cooking functions when
■
the letter "H" is present, which means the element is still hot.
Let the element cool down before using this function again.
Your unit has a built in feature to shut itself off during over
■
voltage conditions, water spillage on the touch control, empty
pan, or for extended cooking durations. If this occurs, you
may turn the burner back on and resume cooking without
issue.
7