Buffalo WLI2-PCI-G54 Quick Setup Manual page 11

For detailed instructions on using Buffalo's Client Manager, please refer to the
AirStation Wireless 54 Mbps* Desktop PCI Adapter Manual, located on the Air
Navigator CD in the MANUAL folder. To quickly connect to an available access
point double click on its icon, select the survey screen, select the proper wireless
network and press the 'Connect' button. This will connect you to the Access
Point, you may be required to enter encryption settings to properly connect.
Depending on the operating system, some screens may vary from those shown
in this guide. However, by accepting default installation settings, Client Manager
should properly install. For more information about configuring and operating
your Wireless 54 Mbp*s Desktop PCI Adapter and Client Manager, refer to the
AirStation Wireless 54Mbps Desktop PCI Adapter Manual, located on the Air
Navigator CD in the MANUAL folder.
◗ Press the Exit button to
exit the Client Manager
installation utility.
◗ The Buffalo Client
Manager is now installed
and running, right clicking on
its icon (the black notebook
icon) will allow you to begin
using it.
11