Step 2: Configure Your Router - Buffalo AirStation Turbo G WHR-HP-G54 Quick Setup Manual

Next, you need to configure your router. This is done from a web browser on a computer
connected to the router. It is recommended to use a computer that is plugged into the AirStation
with an Ethernet cable.
A
. Launch the web browser on the computer that you're going to use to configure the AirStation.
(The computer used to configure the AirStation should be set to obtain an IP address automatically using a
DHCP server.)
B
. Your web browser should automatically attempt to load a web page. If the default web page
loads then the AirStation has automatically configured your Internet connection settings. Please
skip to the next page if you have successfully connected to the
Internet.
C
. If the AirStation cannot automatically configure itself for
your Internet Connection, then a window will open, prompting
you to enter a User ID and Password.
Enter root as the User name and leave the password field
blank.
NOTE: If your web browser doesn't automatically connect you to the
AirStation Configuration Utility, then type 192.168.11.1 in its address
field, and press Enter.
D
. The AirStation will provide different configuration options depending on what it has auto-
detected. Please manually enter your specific connection information. This information can be
supplied by your Internet Service Provider; contact them for account specific information.

Step 2: Configure Your Router