Buffalo WHR-G54S Supplementary Manual page 2

Once the AirStations are powered on, you will want to make sure that they are in
factory default confi guration. On the bottom of each, hold down the "INIT" button
for three seconds. This will reset them to factory defaults. They will take 30-60
seconds to reboot afterwards.
Power on your PC. Make sure that it is confi gured to "obtain an IP address
automatically" from DHCP. Open a web browser and in the address fi eld, enter
192.168.11.1. This is the default IP address of your fi rst AirStation.
A login window will pop up. The default username is "root". Leave the password
fi eld blank and click OK.
The Web-Based Confi guration Utility for your fi rst AirStation will open. Click on the
Advanced tab.