Display Controls - Motorola 533AFDMTB Manual

Note: Due to unceasing modification of our products, your refrigerator may
be slightly different from this instruction manual, but its functions and using
methods remain the same. To get more space in the freezer, you can
remove drawers (except lower freezer drawer).

Display controls

Use your appliance according to the following control regulations, your
appliance has the corresponding functions and modes as the control panels
showed in the pictures below. When the appliance is powered on for the first
time, the backlighting of the icons on the display panel start working. If no
buttons have been pressed and the doors are closed, the backlighting will turn
off.
Controlling the temperature
We recommend that when you start your refrigerator for the first time, the
temperature for the fridge is set to 4 C, my fresh choice to - 7 C and the
freezer to - 18 C. If you want to change the temperature follow the
instructions below.
Caution! When you set a temperature, you set an average temperature for the
whole refrigerator cabinet. Temperatures inside each compartment may vary
from the temperature values displayed on the panel, depending on how much
food you store and where you place it. Ambient temperature may also affect
the actual temperature inside the appliance.
1. Fridge
Press "ZONE" repeatedly until "Fridge" icon lights up and then press "TEMP."
repeatedly to set your desired fridge temperature between 8 C and 2 C, the
temperature will decrease by 1 C with each press and the fridge temperature