Set Your Country (For Australia / New Zealand Customer Only); Set The Date And Time - Brother MFC-7220 Quick Setup Manual

Step 1
Set Your Country (For
6 Australia / New Zealand
Customer Only)
You must set your country so that the machine works
correctly on local telecommunication lines in each
country.
1
Check that the power is turned on by
plugging in the power cord and turn the
power switch on.
Press Menu/Set.
Set Country
Press Set Key
2
Press
(AUSTRALIA or NEWZEALAND).
Australia
Select ▲▼ & Set
3
Press Menu/Set when the LCD shows your
country.
4
The LCD prompts you to make sure of the
country again.
Australia?
1.Yes 2.No
5
If the LCD shows the correct country, press
1 to go to Step
—OR—
Press 2 to go back to Step
country again.
6
After the LCD shows
seconds, it shows
Accepted
8
Setting Up the Machine
or to select the country
6
.
1
to select the
for two
Accepted
Please Wait.
7

Set the Date and Time

The machine displays the date and time, and prints it
on every fax you send.
1
Press Menu/Set.
2
Press 0.
3
Press 2.
4
Enter the last two digits of the year on the
dial pad, and then press Menu/Set.
Year:2005
(e.g. Enter 0, 5 for 2005.)
5
Enter the two digits for the month on the dial
pad, and then press Menu/Set.
Month:03
(e.g. Enter 0, 3 for March)
6
Enter the two digits for the day on the dial
pad, and then press Menu/Set.
Day:01
(e.g. Enter 0, 1.)
7
Enter the time in 24-hour format on the dial
pad, and then press Menu/Set.
Time:15:25
(e.g. Enter 1, 5, 2, 5 for 3:25 P.M.)
8
Press Stop/Exit.
If you make a mistake, press Stop/Exit to
1
start from Step .