Error Message List - Brother P-TOUCH 1900 User Manual

Error Message
4 LINE This message appears if four lines
already exist when you press r.
LIMIT!
BATTERIES This message appears when the
WEAK! installed alkaline batteries become
weak.
BUFFER • This message appears if you hold
EMPTY!
• This message appears if you try to
BUFFER This message appears if you try to
FULL! enter a character, symbol, return or
space after the maximum number of
characters has already been entered.
CAN'T This message appears if the cursor is
HERE! at the end of the text when you hold
down c and press O.
CHANGE This message appears if a high-volt-
ADAPTOR! age adaptor is being used.
CUTTER This message appears if the tape cut-
ERROR! ter is closed when you try to print or
feed the tape.
INVAL. This message appears if the cursor is
CHRS! not below a number when you hold
down c and press O.

ERROR MESSAGE LIST

Cause
down c and press T, but
no text has been entered in the dis-
play.
print, but no text has been entered
in the display.
Remedy
Limit the number of lines to four.
Replace the batteries or use the
AC adaptor.
• Enter some text before starting
this function.
• Enter text before printing.
Delete some existing text so that
more text can be entered.
Move the cursor below a
number before holding down
c and pressing O.
Remove the high-voltage adap-
tor and connect the adaptor
designed exclusively for this
machine.
Turn the P-touch off, then on
again.
Move the cursor below a num-
ber before holding down
c and pressing O.
51