Selecting A Receive Mode (Fax-1940Cn Only); Setting Up The Message Center (Fax-1940Cn Only) - Brother FAX-1840C Quick Setup Manual

Selecting a Receive
10
Mode (FAX-1940CN only)
There are three possible receive modes:
and Manual.
Fax/Tel
Do you want to
receive a fax
automatically?
No
Yes
Do you use the
FAX
for the fax use only?
Yes
No
1
Press Menu/Set.
2
Press 0.
3
Press 1.
4
▲ ▼
Press or to select the mode.
5
Press Menu/Set.
6
Press Stop/Exit.
For more details, see "Setup Receive" in
Chapter 4 of the User's Guide.
Fax Only,
Manual
You control the phone line
and must answer every call
yourself.
Fax Only
The FAX automatically
answers every call as a fax.
Fax/Tel
The FAX controls the line and
automatically answers every
call. If the call is not a fax, it
will ring for you to pick up the
call.
Setting Up the Message
11 Center
(FAX-1940CN only)
You must record an outgoing message in order to use
the Message Center mode.
1
Record Message Center Outgoing
Message (MSG CTR OGM).
See "Recording Message Center Outgoing
Message" in Chapter 7 of the User's Guide.
2
Activate Message Center mode.
Press and hold
LCD shows:
Light
If the Message Center Mode is ON, it over
rides your Receive Mode setting. The
built-in digital Message Center answers
voice calls. If the call is a fax, you can
receive a fax automatically.
For more details, see "Message Center
mode" in Chapter 7 of the User's Guide.
until it lights and the
MC:Msg Ctr
11